Dubbing/Editing
94
* TV/VCR component
Step 2
: Adjusting the
synchronization of the VCR
Follow the steps below when you are
performing digital program edit for the first
time to a tape in a VCR. You can skip this
setting if you have set up your VCR before
using the following procedure.
You can adjust the synchronization of your
camcorder and the VCR to avoid not
recording the starting scene.
1
Remove the cassette from your
camcorder. Prepare a pen and paper
to take notes.
2
Set the VCR to recording pause mode.
Skip this step if you have selected [i.LINK]
in step 11 on p. 92.
b
Note
• Run the tape for about 10 seconds before
pausing. The starting scenes may not get
recorded when you start recording from
the beginning of the tape.
3
Touch
, then [ADJ TEST].
4
Touch [EXEC].
A picture (about 50 seconds long) with 5
[IN] and [OUT] indicators each for
adjusting synchronization is recorded.
Roadstar
47
SABA
21, 76, 91
Salora
89
Samsung
22, 32, 52, 93, 94
Sanyo
36
Schneider
10, 83, 84
SEG
73
Seleco
47, 74
Sharp
89
Siemens
10, 36
Tandberg
26
Telefunken
91, 92
Thomson
76, 100
Thorn
36, 47
Toshiba
40, 93
Universum
47, 70, 84, 92
W.W. House
47
Watoson
58, 83
Manufacturing
company
[IR SETUP] code
Set the recording
device in
rec. pause mode.
ADJ TEST
EXEC
CANCEL
0:00:00:00
PROG. EDIT
