U
si
n
g t
h
e
M
e
nu
Using the Menu
67
FLASH MODE
b
Note
• For DCR-PC109E:
If the flash is not capable of preventing the red-eye phenomenon, you can select only [ON]
or [AUTO].
FLASH LEVEL
You can select an appropriate flash setting for recording with an external flash
(optional).
b
Note
• The setting returns to [NORMAL] when you disconnect the power source from your
camcorder for more than 5 minutes.
SUPER NSPLUS
See page 39 for details.
NS LIGHT
When using the NightShot plus function to record, you can record clearer pictures
by using the NightShot Light to emit infrared rays (invisible).
COLOR SLOW S
See page 39 for details.
G
ON
Select to trigger the flash (optional) regardless of the brightness of the
surroundings.
ON
For DCR-PC109E:
Select to trigger the flash (optional) regardless of the brightness of the
surroundings. The flash goes off prematurely to reduce the red-eye
phenomenon.
AUTO
Select to trigger the flash (optional) automatically.
AUTO
For DCR-PC109E:
Select to trigger the flash (optional) automatically. The flash goes off
prematurely to reduce the red-eye phenomenon.
HIGH (
)
Select to make the flash level higher than the standard setting.
G
NORMAL (
)
Standard setting.
LOW (
)
Select to make the flash level lower than the standard setting.
G
ON
Select to use the NightShot Light (p. 39).
OFF
Select to disable the NightShot Light (p. 39).
,
continued
Содержание Handycam DCR-PC108E
Страница 5: ...Read this first 5 ...
