Sony Handycam DCR-PC108E, Руководство по эксплуатации

Страница: 116 / 148

Troubleshooting
116
Playback
If you are playing back the pictures stored on a “Memory Stick Duo,” refer also to the “Memory Stick
Duo” section. (p. 117)
The external flash (optional) does not
work. • The power of the flash is not turned on, or the flash is not attached
correctly.
• Two or more flashes are attached. Only one external flash can be
attached.
The flash level cannot be changed. • The flash level cannot be changed during Easy Handycam operation.
Flickering or changes in color occurs.
c
This occurs when recording pictures under a fluorescent lamp, sodium
lamp, or mercury lamp in the soft portrait or sports lesson mode. Cancel
[PROGRAM AE] in this case. (p. 64)
END SEARCH does not work. • The cassette was ejected after recording when using a cassette without
Cassette Memory. (p. 125)
• The cassette is new and has nothing recorded.
END SEARCH does not work
correctly. • There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
Symptom Cause and/or Corrective Actions
Cannot play back.
c
If the tape has reached the end, rewind the tape. (p. 49)
Horizontal lines appear on the
picture. The displayed pictures are
not clear or do not appear.
c
Clean the head using the cleaning cassette (optional). (p. 133)
No sound or only a low sound is
heard.
c
Set [MULTI-SOUND] to [STEREO] in the (STANDARD SET)
menu. (p. 83)
c Turn up the volume. (p. 49)
c
On the (STANDARD SET) menu, adjust [AUDIO MIX] from the
[ST2] (additional sound) side until the sound is heard appropriately.
(p. 84)
c When you are using an S VIDEO plug, make sure the red and white plugs
of the A/V connecting cable are connected as well. (p. 59)
The sound breaks off.
c
Clean the head using the cleaning cassette (optional). (p. 133)
Cannot perform the Date search with
the recording date displayed on the
screen.
c
Use a cassette with Cassette Memory. (p. 125)
c Set [ SEARCH] to [ON] in the (EDIT/PLAY) menu. (p. 80)
• There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
“---” is displayed on the screen. • The tape you are playing was recorded without setting the date and time.
• A blank section on the tape is being played.
• The data code on a tape with a scratch or noise cannot be read.
END SEARCH does not work. • The cassette was ejected after recording when using a cassette without
Cassette Memory. (p. 125)
• The cassette is new and has nothing recorded.
END SEARCH does not work
correctly. • There is a blank section in the beginning or middle of the tape. This is
not a malfunction.
Symptom Cause and/or Corrective Actions