34
E:\SONY\2659812111\01GB03BAS_E.fm
DCR-HC23E/HC24E/HC26E/HC35E
2-659-812-
11
(1)
A
A/V connecting cable (supplied)
For DCR-HC35E:
The Handycam Station and your camcorder
are both equipped with A/V OUT jacks
(p. 57). Connect the A/V connecting cable
either to the Handycam Station or to your
camcorder, depending on your setup.
B
A/V connecting cable with S
VIDEO (optional)
When connecting to another device via the S
VIDEO jack, by using the A/V connecting
cable with an S VIDEO cable, pictures can be
reproduced more faithfully than with the
supplied A/V cable connection.
Connect the white and red plugs (left/right
audio) and S VIDEO plug (S VIDEO
channel) of an A/V connecting cable. In this
case, the yellow (standard video) plug
connection is not necessary. S VIDEO
connection only will not output audio.
• You can display the time code on the TV screen
by setting [DISP OUT] to [V-OUT/LCD]
(p. 50).
• For DCR-HC35E:
Do not connect A/V connecting cable to both
the Handycam Station and your camcorder at
the same time, as image disturbance may occur.
When connecting your camcorder to a
TV through a VCR
Connect your camcorder to the LINE IN
input on the VCR. Set the input selector on
the VCR to LINE (VIDEO 1, VIDEO 2,
etc.), if the VCR has an input selector.
When your TV is monaural (Only one
audio input jack)
Connect the yellow plug of the A/V
connecting cable to the video input jack and
connect the white (left channel) or the red
(right channel) plug to the audio input jack
of your TV or VCR.
If your TV/VCR has a 21-pin adaptor
(EUROCONNECTOR)
You need the 21-pin adaptor to connect
your camcorder to a TV for viewing
recorded images. This adaptor is designed
for output use only. This output only
adaptor is supplied with the DCR-HC35E
model with the
label on the bottom
panel but not with DCR-HC23E/HC24E/
HC26E models.
TV/VCR
Playing the picture on a TV (Continued)
