Sony Handycam DCR-DVD100, Руководство по обслуживанию, Страница: 20 / 174

2-13
DCR-DVD100/DVD100E
2-18.LB-084 BOARD (REMOVING OF THE EVF)-2
2
2
A
A
B
C
3
5
4
2
Align the dotted portion of the VF slide assembly
with the dotted line of the VF slide cabinet (lower).
1
Tapping screw
(M1.7
×
3.5)
4
Tapping screw
(M1.7
×
3.5)
1
VF slide assembly
VF slide cabinet (upper) assembly
VF slide cabinet (upper) assembly
To raise the VF slide cabinet (upper)
assembly, insert a flat head
(-) screwdriver into the position shown
by the arrow.
VF slide cabinet (upper) assembly
When re-assembling, slide the
Visibility knob (40) to the fully
right-end beforehand.
3
Slide the VF slide cabinet assembly up to
the position in the direction of the arrow
where the two claws are locked.
RE-ASSEMBLING THE VF SLIDE CABINET
VF slide cabinet (lower)
VF slide cabinet (lower)
When re-assembling is completed,
the VF slide cabinet (upper) assembly
and the VF slide cabinet (lower) are
assembled as shown.
VF slide cabinet (lower)
VF slide cabinet (lower)
Two claws
VF slide cabinet (lower)
Visibility knob (40)
Visibility knob (40)
2
Open the lock of the VF slide cabinet (lower) in the direction of the arrow
A
,
3
while slanting the VF slide cabinet (upper) assembly in the direction
of the arrow B ,
4
remove the Visibility knob (40) from the VF slide cabinet (lower), and
5 remove the VF slide cabinet (upper) assembly by sliding it in the direction
of the arrow
C
.