![background image](http://html.mh-extra.com/html/sony/gtk-xb7/gtk-xb7_operating-instructions-manual_420565030.webp)
30
GB
GTK-XB7.4-582-492-21(1)
BLUETOOTH device
Pairing cannot be performed.
•
Move the BLUETOOTH device closer
to the system.
•
Pairing may not be possible if other
BLUETOOTH devices are present
around the system. In this case, turn
off the other BLUETOOTH devices.
•
Make sure to enter the correct
passkey when selecting the
system’s name (this system) on the
BLUETOOTH device.
The BLUETOOTH device cannot detect
the system.
•
Set the BLUETOOTH signal to on
Connection is not possible.
•
The BLUETOOTH device you
attempted to connect does not
support the A2DP profile, and
cannot be connected with the
system.
•
Enable the BLUETOOTH function of
the BLUETOOTH device.
•
Establish a connection from the
BLUETOOTH device.
•
The pairing registration information
has been erased. Perform the
pairing operation again.
•
Erase the pairing registration
information of the BLUETOOTH
device by resetting the system to
factory default settings (page 31)
and perform the pairing operation
The sound skips or fluctuates, or the
connection is lost.
•
The system and the BLUETOOTH
device are too far apart.
•
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
•
If there is equipment that generates
electromagnetic radiation, such as
a wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
The sound of your BLUETOOTH device
cannot be heard on this system.
•
Increase the volume on your
BLUETOOTH device first, then adjust
the volume using
+/–.
There is severe hum, noise, or
distorted sound.
•
If there are obstacles between the
system and your BLUETOOTH device,
remove or avoid the obstacles.
•
If there is equipment that generates
electromagnetic radiation, such as
a wireless LAN, other BLUETOOTH
device, or a microwave oven nearby,
move them away.
•
Turn down the volume of the
connected BLUETOOTH device.
Party Chain and speaker add
function
Party Chain function cannot be
activated.
•
Check the connections (page 22).
•
Make sure the audio cords are
connected correctly.
•
Select the function other than the
Party Chain function does not work
properly.
•
Turn off the system. Then, turn it
back on again to activate the Party
Chain function.
Unable to connect a BLUETOOTH
device with the system in the speaker
add function.
•
After connecting two GTK-XB7
systems, perform the pairing
procedure between a BLUETOOTH
device and the system where the
(BLUETOOTH) indicator is flashing.
Then perform the BLUETOOTH
connection.