GTK-XB60
15
2-15. FRONT PANEL BLOCK-1
• Continued on 2-16 (page 16).
2
Align the front panel block and wood
cabinet around the boss from the side,
insert a jig between them, and open a
gap of about 3 to 5 mm (perform at
the top, bottom, left, and right).
Note
1:
When using a jig, please work carefully
so as not to damage the front panel
block and wood cabinet.
bottom side
top side
– Top view –
– Bottom view –
4
Insert a thick screwdriver into the bottom side
and widen the gap (perform at two places).
Note
2:
Be careful because if a screwdriver is
inserted too far in, the speaker unit (WF)
may get damaged.
3
Insert a thick screwdriver into the top side and
widen the gap (perform at two places).
Note
2:
Be careful because if a screwdriver is
inserted too far in, the speaker unit (WF)
may get damaged.
front side
boss
front panel block
about
3 to 5 mm
1
two screws
(M4
u
20)
front panel block
1
two screws
(M4
u
20)
wood cabinet
total ten bosses (US, CND)
total eleven bosses (Except US, CND)
Note 3:
This boss excludes US
and CND models.
