Introducing the Sony LCD Projection TV
14
KDF-WE/WF655
2-059-370-
14
(2)
Enjoying Your LCD Projection TV
Indicators
The indicators show the current status of your LCD projection TV.
Screen
To minimize reflection, the screen’s surface has a special coating. Read the
instructions “Cleaning the Screen Surface” on page 15 carefully before
cleaning.
Inappropriate cleaning methods could damage the screen’s finish.
Projection lamp
Your LCD projection TV uses a projection lamp as its light source. The
projection lamp is located under the Control Panel cover as noted in the
diagram above. Note the following:
❑
After turning on your LCD projection TV, it may take a while before the
picture appears (1 minute or less).
❑
When the projection lamp wears out, the screen goes dark. Replace the
lamp with a new Sony XL-2100U or XL-2100 (for WE655 series), or
XL-2200 (for WF655 series) replacement lamp (not supplied).
POWER
STANDBY
TIMER
LAMP
POWER
PRO
STD/DUO
LAMP
TIMER
POWER/STANDBY
Screen
Projection lamp
Indicators
Projection lamp
Indicators
For KDF-WE655 series
For KDF-WF655 series
✍
After replacing the lamp, be sure to attach the lamp cover securely;
otherwise, your LCD projection TV will not turn on. For details on lamp
replacement, see “Replacing the Lamp” on page 16.
✍
The light emitted from the lamp is quite bright when your LCD projection
TV is in use. To avoid eye discomfort or injury, do not look into the
housing when the power is on.
01COV.book Page 14 Thursday, February 17, 2005 8:01 PM
