39
LOG functions (with an optional BKFV-300
installed)
System
1080/30Psf, 30P
1080/29.97Psf, 29.97P
1080/25Psf, 25P
1080/24Psf, 24P
1080/23.976Psf, 23.976P
(The output frame rate is
automatically set with the film rate.)
Signal source
Film gamma output (MY board) or
HD enhancer output (EN board)
Signal format
based upon SMPTE RP-xxx
Signal length
10 bit each color/pixel
Signal color space
4:4:4 RGB or 4:4:4 Y/C
(The 4:4:4 signal flows in dual HD-
SDI output.)
AUDIO functions (with an optional BKFV-500
installed)
Reproducing method
Laser lamp (690-nm)
Optical pickup: monaural/stereo
reproduction (35-mm film),
monaural reproduction (16-mm film)
Accuracy: ±0.3 mm
Slit-height accuracy: ±0.3 mm
Output
ANALOG OUT (D-sub 15-pin):
Analog audio output (D-sub 15-pin/
XLR 3-pin conversion using the
supplied cable)
DIGITAL OUT (D-sub 15-pin):
Digital audio output (conforming to
the AES/EBU format, D-sub 9-pin/
XLR 3-pin conversion using the
supplied cable)
Output level
+4 dBu ±1 dB at film reference tone
Adjustable range: ±6 dB
Delay compensation
0 to 15 frames (controlling output A
and B independently)
Test signal generator
1 kHz (4 dBu,
digital –20 dBFS)
Equalizer
CUT: 8 kHz to 16 kHz adjustable
Boost: 1 to 40 adjustable
Frequency response
40 Hz to 12.5 kHz ±2 dB with 35-
mm film
Signal-to-noise ratio
more than –70 dB
Reference output level +4 dBu
Caution
The use of optical instruments with this product will
increase eye hazard.
Laser diode properties
Materials:
AlGalnP
Wavelength:
690 nm
Emission duration:
Continuous
Laser output power:
less than 44.6 µW
less than 0.2 mW (unit)
less than 35 mW (laser)
*This output is the value measured at a distance 200 mm
from the objective lens surface on the optical pick-up
block.
Designs and specifications are subject to change
without notice.