Sony FD Trinitron WEGA KV-27FV300, Руководство по обслуживанию

Страница: 141 / 205

Using the Menus
45
Using the Timer Menu
Current Time Set your TV to the current day and time.
1 Use the joystick to scroll up or down to enter the correct day and
time, then press .
2
Press to return Timer menu or press to exit the menu.
Timer 1 and
Timer 2
Scheduled
viewing
Use the timers to program your TV to turn on and off by day, time,
duration and channel. The timers duration is maximum of 6 hours. When
the channel is fixed, it is not necessary to set the channel. Press
to
program Timer 1 or Timer 2.
1
Use the joystick to highlight to select Timer 1 or Timer 2, then press .
2
Use the joystick to enter the desired day, start time, duration, and
channel, then press
. The timer status should be On when the
Timer has been set, and the Timer light on the front panel of the TV
should be turned on.
3 Press to exit the menu.
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1 and Timer 2 settings will be cleared.
To access the Timer menu, refer to the following steps:
To Display To Highlight To Select
Press joystick
f
to highlight an option then press .
Timer 1 : Set
Timer 2 : Set
:
AM
Video Audio Channel Parent Timer Setup Basic
Current Time
Program the time
Program
Move: Select: End:
You must set the Current Time before you can use Timer 1 or Timer 2.
Select Off to turn off the Timer (your previous settings will be saved).
01US01COV-BR2.book Page 45 Wednesday, February 13, 2002 12:44 PM