Sony FD Trinitron KV-32FQ70B, Руководство по обслуживанию

Страница: 14 / 78

- 14 -
2-4. Service Position 2-5. G Board Removal
To place the chassis in the service position, remove the
speaker assembly box (see 2-2.) and insert the main bracket
firmly into the T-slot located on the left corner of the beznet
as indicated (see inset). To gain access to the underside of
the boards follow the instructions on page 17. [Removal
and Replacement of the main bracket bottom plates].
2-6. D2 Board Removal
To remove the D2 board remove the two screws circled,
release the clips circled and ease the board gently away from
the support bracket.
Screws
Clips
2-7. D Board Removal
To remove the D board first remove the D2 bracket by
removing the two screws (one on each side of the bracket)
and releasing the four clips (two on each side of the bracket).
The D board can then be removed using the same method as
the G board.
Screw
Clips
To remove the G Board release the clips circled and ease the
board gently away from the support bracket.
Clips