5-7
1-2.
INITIALIZATION OF E AND F PAGE DATA
1.
Initializing E and F Page Data
Note:
If the E and F page data has been initialized, the following
adjustments need to be performed again.
1) Modification of E and F page data
2) Camera system adjustments
3) LCD system adjustments
4) Battery end adjustments
Adjusting page
E
Adjusting address
00 to 9D
Adjusting page
F
Adjusting address
10 to FF
Initializing Method:
Order Page Address Data Procedure
1
0
01
01
2
3
00
2D
3
3
01
2D
Press PAUSE button.
4
Wait for 3 seconds.
5
3
00
Check the data changes to “00”.
6
Perform “Modification of E
and F page Data”.
2.
Modification of E and F Page Data
If the E and F page data has been initialized, change the data of
the “Fixed data-2” address shown in the following table by manual
input.
Modifying Method:
1)
Before changing the data, select page: 0, address: 01, and set
data: 01.
2) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
Note:
If copy the data built in the different model, the
camcorder may not operate.
3)
When changing the data, press the PAUSE button of the
adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
4)
Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification of E and F Page Data:
Order Page Address Data Procedure
1
3
00
29
2
3
01
29
Press PAUSE button.
3.
E Page Table
Note 1:
Fixed data-1: Initialized data.
(Refer to “1. Initializing of E and F Page Data”)
Note 2:
Fixed data-2: Modified data.
(Refer to “2. Modification of E and F Page Data”)
Address Initial value
Remark
00 to 10
Fixed data-1 (Initialized data)
11
Fixed data-2
12 to 1E
Fixed data-1 (Initialized data)
1F
Fixed data-2
20 to 22
Fixed data-1 (Initialized data)
23
07
Color reproduction adj.
24
E2
25
FC
26
FF
27
F3
28
24
29
16
2A
06
2B
Fixed data-2
2C
Fixed data-1 (Initialized data)
2D, 2E
Fixed data-2
2F to 39
Fixed data-1 (Initialized data)
3A
Fixed data-2
3B to 42
Fixed data-1 (Initialized data)
43
Fixed data-2
44
Fixed data-1 (Initialized data)
45
Fixed data-2
46, 47
Fixed data-1 (Initialized data)
48, 49
Fixed data-2
4A to 4E
Fixed data-1 (Initialized data)
4F
Fixed data-2
50 to 69
Fixed data-1 (Initialized data)
6A
Fixed data-2
6B to 6F
Fixed data-1 (Initialized data)
70 to 72
Fixed data-2
73
Fixed data-1 (Initialized data)
74
Fixed data-2
75
Fixed data-1 (Initialized data)
76, 77
Fixed data-2
78 to 91
Fixed data-1 (Initialized data)
92
Fixed data-2
93 to 99
Fixed data-1 (Initialized data)
9A to 9C
Fixed data-2
9D
Fixed data-1 (Initialized data)
Содержание FD Mavica MVC-FD75
