masterpage:Left
filename[G:\_Upload\3073074111\307307411MVCFD100UC\02GB-
MVCFD100UC\09add.fm]
90
model name1[MVC-FD100/200]
[3-073-074-11(1)]
The moving image breaks
off when you play back an
image on a computer.
•
You are playing back the file from the floppy disk
or the “Memory Stick.”
t
Copy the file to the hard disk of the computer
and then play back the file from the hard disk
(page 32).
Your camera cannot delete
an image.
•
The image is protected.
t
Cancel the protection (page 74).
The power turns off
suddenly.
•
With the PLAY/STILL/MOVIE selector set to
STILL or MOVIE, if you do not operate the camera
for about three minutes while the power is on, the
camera turns off automatically to prevent wearing
down the battery pack.
t
Turn on the camera.
•
The battery pack is discharged.
t
Replace it with a fully charged battery pack.
The image does not
appear on the TV screen.
•
The VIDEO OUT setting of your camera is
incorrect.
t
Change the setting (page 55).
The slide show function
stops automatically.
•
The slide show function stops after about
20 minutes when using a floppy disk.
t
To continue the slide show, select [START]
again (page 72).
You cannot use the
PROGRAM AE function.
•
Your camera is set to TEXT mode or the PLAY/
STILL/MOVIE selector is set to MOVIE.
t
Set the PLAY/STILL/MOVIE selector to STILL
and change the setting (pages 53, 54).
The macro function does
not work.
•
PROGRAM AE is set to the Panfocus mode.
t
Cancel the Panfocus mode (page 65).
Symptom
Cause and/or Solution
01cov.book Page 90 Thursday, November 29, 2001 1:20 PM
