Sony FCBEH3300, Техническое руководство

Страница: 14 / 64

1
Basic Functions
FCB-EH3400/EH3300(GB) A-E4D-100-13(1)
Register Setting
The camera’s default settings can be changed by the
register setting command.
Register Setting Command:
8x 01 04 24 mm 0p 0q FF
mm: Register No. (=00 to 7F)
pq: Register Value (=00 to FF)
Register Inquiry Command:
8x 09 04 24 mm FF
mm: Register No.
y0 50 0p 0p FF
pp: Register Value
(returned from the camera)
Example: To set communication speed to 38400 bps
8x 01 04 24 00 00 02 FF
After sending this command, turn power off and
back on (power reset) to resume communication
control at 38400 bps.
Example: Sending to confirm settings
8x 09 04 24 00 FF
y0 50 00 03 FF is returned from the camera
The register setting items and No. are as follows.
Baud Rate: 00
Communication speed can be changed.
Monitoring Mode: 72
This register “72” allows digital output mode
configuration.
For details on each output mode and parameter, see
“Register Setting” on page 50.
Output Enable: 73
“Analog Output”, “Digital Output”, or “Both” can be
set.
For details on parameters, see “Register Setting” on
page 50.
Zoom Limit: 50 (Wide end), 51 (Tele end)
The Wide and Tele zoom limits can be set.
E-Zoom Max: 52
The maximum digital zoom limit can be specified
(default is ×12).
FocusTrace: 54
When you want to prioritize zoom speed, set
FocusTrace to OFF to minimize the transition time
between Wide and Tele zoom (although the image
may be blurred because focus is not tracked). For
example, the focus transition time from Wide to
Tele ends, which typically takes 2.3 seconds, can be
reduced to 1.6 seconds.
FocusOffset: 55
Placing a dome cover in front of the camera may
cause the focal distance of the camera to change.
Especially at the Tele end, this effect exceeds the AF
range, so focus cannot track, although it responds
to changes in this value.
For details, see “Register Setting” on page 50.
Privacy Zone Masking Settings
For details, see page 15.
Motion detection
For details, see page 19.
Title Display
• You can set a title composed of up to 11 lines. One
line can contain up to 20 characters.
• You can set display on/off, the horizontal position of
the first character, blinking state and color for each
line.
• The camera gives priority to lines of a title when the
camera status is displayed on the relevant line. On the
lines where a title is not set, the camera status is
displayed.
Line Number 00 to 0A
H-position 00 to 1F
Blink
00: Does not blink
01: Blinks
Color
00 White
01 Yellow
02 Violet
03 Red
04 Cyan
05 Green
06 Blue
00 01 02 03 04 05 06 07
A B C D E F G H
08 09 0a 0b 0c 0d 0e 0f
I J K L M N O P
10 11 12 13 14 15 16 17
Q R S T U V W X
18 19 1a 1b 1c 1d 1e 1f
Y Z & ? ! 1 2
20 21 22 23 24 25 26 27
3 4 5 6 7 8 9 0
28 29 2a 2b 2c 2d 2e 2f
À È Ì Ò Ù Á É Í
30 31 32 33 34 35 36 37
Ó Ú Â Ê Ô Æ Ã
38 39 3a 3b 3c 3d 3e 3f
Õ Ñ Ç ß Ä Ï Ö Ü
40 41 42 43 44 45 46 47
Å $ ¥ £ ¿ ¡
48 49 4a 4b 4c 4d 4e 4f
ø “ : ‘ . , / -