
27
Basic Settings using the Subdisplay
Chapt
er
3
B
a
s
ic
A
d
jus
tment
s
and Se
tt
ing
s
F65RAW-HFR mode:
23.98pForPB, 29.97pForPB, 24pForPB, 25pForPB,
S119.88p (23.98p), S119.88p (29.97p), S120p (24p),
S120p (25p)
The mode can be switched between F65RAW mode, HD
mode, and F65RAW-HFR mode on the <System Format>
page in the VF menu.
For details, see “3-5 Setting the Shooting Mode” (page
35).
It is recommended that the power be turned off and back
on again after changing the video format.
Changing the video format
1
Select the video format on settings page 1, then press
the MENU SEL/ENTER dial.
Settings page 1
2
Turn the MENU SEL/ENTER dial to select the video
format, and press the MENU SEL/ENTER dial.
To set using the VF menu
Set on the <System Format> page in the Camera menu
.
VF and SDI OUT connectors output format
Setting the camera main video format automatically
determines the signal format that is output on the VF and
SDI OUT connectors.
* The output image scan type can be set to Interlace or Frame Drop.
3-3-3 Setting the Shutter Value
The shutter of the camera can be viewed and adjusted, with
settings displayed as shutter angles, just as for a film
camera. Two operation methods are available for the
adjustment: stepwise and continuous.
Step mode
Frequently-used shutter angle values can be selected,
enabling step selection of the shutter values.
a) Selectable for the electronic shutter only.
The corresponding shutter speeds vary according to the
frame frequency and frame rate of the selected video
format.
Continuous mode (ECS)
The shutter value can be changed smoothly in continuous
mode in the range 4.2° to 360.0° (electronic shutter) or
11.2° to 180.0° (mechanical rotary shutter).
To obtain your desired shutter value quickly, select a value
nearest your desired one in Step mode, then switch to
Continuous mode and adjust the shutter value.
Changing the shutter value in Step mode
In Step mode, one of the registered shutter values can be
selected.
1
Select the shutter value on settings page 1, then press
the MENU SEL/ENTER dial.
Note
Camera image
VF connector
output
SDI OUT connector
output
23.98p
23.98PsF
23.98PsF
29.97p
29.97PsF
29.97PsF
24p
24PsF
24PsF
25p
25PsF
25PsF
50p
50i*
50i*
Video format
59.94p
59.94i*
59.94i*
S59.94p
59.94i*
59.94i*
S60p
60i*
60i*
Step No.
Shutter angle
1
360.0
a)
2
270.0
a)
3
180.0
4
172.8
5
150.0
6
144.0
7
90.0
8
45.0
9
22.5
10
11.2
Camera image
VF connector
output
SDI OUT connector
output