Sony EXWAVEPRO SNC-CM120, Руководство пользователя

Страница: 10 / 100

Pre
par
at
ion
Assigning the IP Address to the Camera
10
5
Select Add Program… .
6
In the Add Program dialog, select IP Setup
Program and click OK .
Then the IP Setup Program is added to the
Programs and Services list.
7
Click OK .
When the above procedure is completed, the
cameras connected in the local network are
displayed in the IP Setup Program.
When using Windows Vista
Installing software
A warning message regarding the active contents may
appear when you install software such as IP Setup
Program from CD-ROM. In this case, operate as
follows:
Example: In case of IP Setup Program
If pop-up “AutoPlay” appears when a CD-ROM is
inserted into the CD-ROM drive, click
Install or run
program .
Note
If you click Open folder to view files , Web browser will
not open automatically. In this case, double-click the
“index.htm” file in the CD-ROM.
If message “Internet Explorer” appears, click Yes .