Sony ExwaveHAD DXC-990P, Инструкция по эксплуатации

Страница: 31 / 48

31
Installation
In
st
al
la
tio
n
and
C
onn
ec
tion
s
Use the optional lens hold bracket
If the lens mount becomes loose, the lens
may come out and fall, causing serious
injury to persons or damage to articles.
When you install the camera high up for a
long period of time, take preventive
measures or safety precautions against
falling.
The following optional lens hold brackets
are available as service parts.
For use with DXC-990P
Part Number: A-8279-913-A
Lens hold bracket (990/990P) assy.
To purchase the product, contact your
nearest Sony dealer.
Avoid installing the camera in a
location subject to strong vibration
or shock
If a camera or lens is subject to strong
vibration or shock, the lens mount may
become loose and fall, causing injury to
persons or damage to articles.
Check the lens mount
Check the lens mount at least once a year to
ensure it has not become loose.
To attach the camera to a microscope or an
surgical microscope, it is necessary to attach
an appropriate adaptor.
The mounting procedure is the same as that
of the lenses.
For details, refer to the instruction manual
for an adaptor to be used
.
To mount the camera on a tripod, use the
screw hole on the bottom or top panel of the
camera.
Use the following screw.
To attach the camera on a wall or ceiling, use
the appropriate bracket and mounting screws
(U1/4
″
, 20 UNC).
Mounting a Microscope
Adaptor
Mounting on a Tripod
Attaching to a Wall or Ceiling
U1/4
″
, 20 UNC
= 4.5 mm ± 0.2 mm
(ISO standard)