Sony Electronic Viewfinder HDVF-C30W, Руководство по обслуживанию

Страница: 13 / 60

1-7 (E)
HDVF-C30W
4. Disconnect the harness from the connector (CN2) on
the RE-208 board.
5. Disconnect the harness from the connector (CN7) on
the PR-267 board.
6. Remove the three screws (M2 x 5) and remove the
RE-208 board from the PR-267 board.
7. Remove the four screws (PS2
x
4) and remove the
board-to-board connector from the PR-267 board.
PS2
x
4
M2 x 5
PS2 x 4
CN7
CN2
RE-208 board
PR-267
board
Board-to-board
connectors
PS2 x 4
PS2 x 4
LCD panel
8. Remove the three screws (PS2 x 4) and remove the
LCD panel.
9. Install the new LCD panel.
Precaution for installation
When installing the new LCD panel, be careful not to
attach dust or fingerprint on the display area of the
LCD panel.
Installation position
Install the LCD panel by pushing it against the sides
“a” and “b” as far as it can go, of the front chassis.
10. Perform the setting of the switches S1 and S2 of the
PR-267 board. (Refer to Section 1-8-1.)
11. Install the removed parts by reversing the steps 1 to 7
of removal.
Precaution for installation
Be sure to insert the connectors to the circuit board
securely for sure connection of the connectors.
a
VR-280 board
b
Front chassis
LCD panel
Ribs