— 3 —
ECM-HW1
1
Remove
the
serial number label from the service receiver.
2
Remove the model number plate from the part to be repaired, and attach it on the service part.
3
Attach the serial number label which is removed from the service receiver (
1
)
on the serial number part of the model number plate.
4
Remove the all labels except for the model number plate from the parts to be repaired,
and attach these labels to service parts.
1
Remove the all labels except for the battery label from the parts to be repaired,
and attach these labels to service parts.
Changing labels
Microphone
Receiver
Service receiver
(only with serial number label)
Service microphone
(only with battery label with serial No.)
(1) Because communication is possible only between the matched pair of this product when the product is shipped from the factory
or supplied as the repair part, the same serial number should be carried both by a microphone and a receiver that enables
identification of the matched pair among the mixed use of the multiple units.
(2) If the approved certificate labels of the respective countries in which this product is marketed and customer uses is not attached
to the product before use, ignorance of this requirement may be punishable.
Repaired microphone
(with all the labels except for the battery
label from the part to be repaired)
Leave the battery label.
Repaired receiver
(with all labels from the part to be repaired)
Model number
plate
Korea label (T)
(Korea model only),
Taiwan label (R)/
Chaina label (R)
(Chinese model only)
Korea label (T)
(Korea model only),
Taiwan label (R)/
Chaina label (R)
(Chinese model only)
Model number plate
WEEE label
(AEP model only)
Serial number label
Serial number part
