A-1099
MK07853V1IW02SEP
© 2002 Sony Electronics Inc. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features, design and specifications are subject to change without notice.
All non-metric weights and measures are approximate.
Sony is a registered trademark of Sony.
The ECM-88 Series provides a flat-and-wide frequency response (20 Hz
to 20 kHz), which provides natural sound reproduction. This enables the
operator to add sound effects easily during the mixing process.
Flat-and-Wide Frequency Response
Optional Accessory
°
°
°
Frequency Response Characteristics
Two Types of Termination
Two types of termination are available, allowing users to choose the
most appropriate output connector to meet their specific requirements.
ECM-88
: Supplied with a Sony 4-pin connector (SMC9-4P), for use
with the DC-78 power-supply unit or the WRT-8B wireless
bodypack transmitter.
EMC-88PT
: Offered without a connector (pigtail), so users can choose
the connectors according to their transmitter.
Dual-Diaphragm Mechanism
Features
Specifications
Water-proof sheet
Diaphragm
Back-plates
Back-plate case
Diaphragm tray
Diaphragm tray
*1
0 dB = 1V/Pa., at 1 kHz
*2
0 dB SPL = 20µ Pa.
ECM-88/88PT Electret Condenser Microphones
Capsule type
Electret condenser
Directivity
Omni-directional
Frequency response
20 Hz to 20 kHz
Sensitivity
-52 dB
*1
±2 dB (when used in combination with the DC-78)
(at 1 kHz)
-38 dB
*1
(12.6 mV)
Output impedance
100
Ω
±20%
(at 1 kHz)
(when used in combination with the DC-78)
2.5 k
Ω
±30%
Dynamic range
99 dB or more
Signal-to-noise ratio
68 dB or more (A-weighted, 1 kHz, 1Pa.)
Inherent noise
26 dB SPL
*2
or less (A-weighted, 1 kHz, 1Pa.)
Wind noise
45 dB SPL
*2
or less (when using the supplied windscreen)
Induction noise from
5 dB SPL
*2
or less
external magnetic field
(when used in combination with the DC-78)
Maximum input sound
125 dB SPL
*2
pressure level
Cable length
8.2 feet (2.5 m)
Output connector
ECM-88: Sony SMC9-4P
ECM-88PT: no connector (pigtail)
Power requirements
DC 1.1 to 10.0 V
Dimensions
5
/
32
x
5
/
32
x
11
/
16
inch (3.5 x 3.5 x 16.8 (h) mm)
(microphone capsule)
Weight
ECM-88: 32 g (including microphone cable)
ECM-88PT: 20 g (including microphone cable)
Supplied accessories
ECM-88: Microphone holder (x 2, tie-clip and double-pin
types), urethane windscreen (x 1), carrying case
(x 1), operating instructions (x 1)
ECM-88PT: Operating instructions (x 1)
DC-78 Power Supply Unit
Power requirements
Internal battery: DC 1.5 V (AA-size (LR6) alkaline battery)
External battery: DC 12 to 48 V
Battery life
Approx. 6000 h
Input connector
Sony SMC9-4S
Output connector
XLR-3-12C type
Dimensions
13
/
16
x 5
3
/
4
inches (20.0 dia. x 144.0 (h) mm)
Weight
Approx. 4.59 oz (130 g) including batteries
Supplied accessory
Operating instructions (x 1)
DC-78
DC-78 DC Power Supply Unit
• Designed for use with the ECM-88 and Sony lavalier
microphones equipped with an SMC9-4P connector.
• Two-way powering: battery operation (using an
AA-size (LR6) alkaline battery) or external DC
operation (12 to 48 V).
• Supplied with an SMC9-4S input connector
and an XLR 3-pin output connector.
Two Types of Microphone Holders
The ECM-88 includes two types of microphone
holders: double-pin and tie-clip.
A urethane windscreen is also included.
Water-Resistant Design
A water-resistant architecture is used within each microphone capsule,
preventing water or perspiration from entering the capsule and, in turn,
reducing damage to the diaphragm. This architecture allows the
ECM-88/88PT microphones to maintain sound clarity
in almost any application from theater productions to
location recordings.
Ultra-Compact Microphone Capsule
The microphone capsule of the ECM-88 Series is
also ultra compact, at just 3.5 x 3.5 x 16.8 mm
(5/32 x 5/32 x 11/16 inch).
This miniature design makes
it easy to conceal.
ECM-88/88PT electret condenser microphones use a dual-diaphragm
mechanism, which contributes to their high sensitivity and low inherent
noise characteristics. The diaphragm and back-plates are fixed vertically
to the microphone capsule, which effectively reduces the mechanical
noise caused by cable vibration and friction. In addition,
the diaphragm for each microphone uses a rectangular
'tray' instead of a fragile ring, which
minimizes deformation of the
diaphragm to maintain
sound quality.
ECM-88 with WRT-8B Bodypack Transmitter
Printed in USA (10/02)
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional
