Sony EA50EH Скачать руководство пользователя страница 108

Страница: 108 / 136

108

The battery pack discharges too quickly.

• Ambient temperature is too high or low, or the battery pack has not been charged enough.

This is not a malfunction.

• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace

it with a new one (p. 19, 123).

The image on the viewfinder is not clear.

• When the large LCD viewfinder is attached, turn the viewfinder lens adjustment ring until the

image appears clearly (p. 30).

The supplied Wireless Remote Commander does not function.

• Set [REMOTE CONTROL] to [ON] (p. 102).
• Remove any obstructions between the Wireless Remote Commander and the remote sensor

of the camcorder.

• Keep strong light sources, such as sunlight or overhead lighting, away from the remote

sensor, otherwise the Wireless Remote Commander may not function properly.

• Insert a fresh battery in the compartment with its +/– terminals matching those of the

compartment (p. 11).

Another video device malfunctions when you use the supplied Wireless
Remote Commander.

• Select a commander mode other than DVD2 for your video device.
• Cover the sensor of your video device with black paper.

When a device is connected to the REMOTE jack, the camcorder or the device
does not operate properly.

• The connected device may react slowly to some operations.
• If you disconnect the cable from the device while the cable is still connected to the

camcorder’s REMOTE jack, the camcorder may not restore the proper settings. Disconnect
the cable also from the camcorder’s REMOTE jack.

Troubleshooting (Continued)

Содержание EA50EH









































































































































Результаты поиска

Содержание EA50EH

Отзывы:

Похожие инструкции для EA50EH

Бренды по названию

Популярные бренды

Sony EA50EH, Руководство по эксплуатации

Результаты поиска

Содержание EA50EH

Отзывы:

Похожие инструкции для EA50EH

Бренды по названию

Популярные бренды