5
For details, see “Locking the POWER switch (POWER SW
LOCK)” on page 13.
G
Cross Remote condition indication
Indicates the signal transmission condition of the wireless
remote control function (4 levels).
: Good transmission
: Somewhat good transmission
: Somewhat poor transmission
: Poor transmission
: Unable to communicate with paired receiver
When the wireless remote control function is off, this
indication does not appear.
H
Battery indication
Shows the battery condition.
For details, see “Battery indication” on page 5.
I
Menu display section
The status of 17 different functions are displayed here. To
select the function, press the + or – button repeatedly.
For details, see “Setting Menus” on page 10.
Power Supply
The transmitter can operate on two LR6 (size AA) alkaline
batteries continuously for about 5 hours at 25 °C (77 °F).
Installing the batteries
1
Squeeze the battery-holder tabs inward (in the
direction of the arrows) and slide out the battery
holder.
2
Insert new batteries, making sure the polarities are
correct, and then return the battery holder to its
original position.
Battery indication
The power status is indicated by eight level indications.
Replace both batteries when the battery indication starts to
flash.
Be sure to check the expiration date printed date on the
new batteries before using them.
• When BATTERY TYPE is set to TYPE1, the power
status is indicated based on the use of new LR6 (size
AA) Sony Alkaline batteries. An incorrect indication
may result when a different kind of batteries, a different
brand of batteries or old batteries are used. If you plan to
use other kind of batteries than alkaline, set the
BATTERY TYPE function according to the type of
batteries to be used.
• If you plan to use the transmitter for a long period of
time, it is recommended that you replace the batteries
with brand new ones.
For details on BATTERY TYPE setting, see “Setting the
battery type (BATTERY TYPE)” on page 12.
Notes
