Sony DWM-02, Руководство по эксплуатации

Страница: 23 / 36

23 Setting Menus
For details on wireless remote control function, see
“Using the Cross Remote” on page 15.
Power Save Setting
(POWER
SAVE)
To conserve power, this setting allows you
to put all microphone functions to sleep.
ACTIVE:
The microphone operates
normally.
SLEEP:
The sleep function is on. During
sleep, the POWER indicator flashes at 2-
second intervals.
To change back to normal
operation
During sleep, press the SET, +, or – button.
You can also use the wireless remote
control to change the receiver back to
normal operation.
For details on wireless remote control function, see
“Using the Cross Remote” on page 15.
If the microphone is turned off while power
save setting is set to “SLEEP”, the setting
will change to “ACTIVE” automatically.
Setting the Battery Type
(BATTERY TYPE)
Set this item according to the type of
batteries you use to obtain accurate battery
power status indication.
TYPE1: The power status is indicated
based on characteristics of new LR6 (size
AA) Sony Alkaline batteries. Select this for
LR6 (size AA) alkaline batteries.
TYPE2: Select this for rechargeable
nickel-metal-hydride batteries.
TYPE3: Select this for lithium batteries.
The characteristics of batteries change
according to battery type and
environmental conditions. It is
recommended that you learn the
characteristics of batteries you use before
using them.
Displaying the
Accumulated Use Time
(TIME)
You can display the accumulated battery
use time as a rough estimate of total
microphone usage.
The factory setting is “00:00”.
To reset the accumulated time
indication
1
Hold down the SET button until the
time indication flashes.
2
Press the – button so “00:00 RESET”
appears, and then press the SET
button.
Using wireless remote control, this function
can be controlled from the receiver and
other devices.
For details on wireless remote control function, see
“Using the Cross Remote” on page 15.
Setting the Encrypted
Transmission Function
(ENCRYPTION)
You can set the encrypted transmission
function.
SECURE KEY:
Sets the secure key
method.
PASSWORD:
Sets the password method.
Note
Note