4-11
DVS-7200AE IM
MIX-35 board
UP-10 board
WKG-27 board
Spacers
OUT-9 board
DA-94 board or SD-48 board
ADC-21 board
ADI-3 board or DI-34 board
WKG-27 board
MIX-35 board
Shield plate
Spacer
WKG-12 board
<Type 3>
This Type’s Optional Boards
Slot No.
Optional board
Pre-installed board
7, 9
UP-10 board (BKDS-7280)
MIX-35 board
WKG-12 board (BKDS-2070)
or
WKG-27 board (BKDS-7370)
11
UP-10 board (BKDS-7280)
MIX-35 board (BKDS-7250 when using BKDS-7025/7026)
or
MIX-35 board (BKDS-7340 when using BKDS-7015)
WKG-12 board (BKDS-2070)
MIX-35 board (BKDS-7250 when using BKDS-7025/7026)
or
or
WKG-27 board (BKDS-7370)
MIX-35 board (BKDS-7340 when using BKDS-7015)
12, 13
DA-94 board (BKDS-7161)
OUT-9 board
SD-48 board (BKDS-7163)
16 to 18
ADI-3 board (BKDS-7111)
ADC-21 board (BKDS-7110)
DI-34 board (BKDS-7113)
After checking the installation direction of the optional board by its connector number, connect the
optional board to the connectors on the pre-installed board.
n
When installing the optional boards, confirm that the connectors are tightly connected. If the connectors
cannot be completely connected, the optional board may be placed in the other way.
Removal of WKG-27 board
Pinch the board spacers on the board using a pair of long-nose prier, releasing the lock. Then pull out the
WKG-27 board.
n
A spacer that was attached on the WKG-27 board remains on the MIX-35 board.
4-3. Installation of Options for DVS-7200A
