23
H
ook
up
s
Step 4: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
Components to be connected
Connection
Your setup (example)
TV
• Surround effects:
– TVS DYNAMIC (page 54)
– TVS WIDE (page 54)
Stereo amplifier (receiver) and 2 speakers
• Surround effects:
– TVS STANDARD (page 54)
or
MD deck/DAT deck
• Surround effects:
– TVS STANDARD (page 54)
AV amplifier (receiver) having a Dolby*
1
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects:
– Dolby Surround (Pro Logic) (page 91)
AV amplifier (receiver) with 5.1 ch input jacks
and 4 to 6 speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 91)
– DTS (5.1 ch) (page 91)
– Super Audio CD Multi channel (page 91)
or
AV amplifier (receiver) with digital input jacks
having a Dolby Digital or DTS*
2
decoder and 6
speakers
• Surround effects:
– Dolby Digital (5.1 ch) (page 91)
– DTS (5.1 ch) (page 91)
A
D
A
B
C
D
,
continued