Sony DVP-NS508P, Руководство по эксплуатации, Страница: 14 / 64

14
Step 2: Connecting the Video Cords
Connect this player to your TV monitor, projector, or audio component such as an AV amplifier
(receiver) using a video cord. Select one of the patterns
A or B , according to the input jack on
your TV monitor, projector, or audio component.
In order to view progressive signal (525p or 625p) pictures with a compatible TV, projector, or
monitor, you must use pattern
B .
A
Video input jack
You will enjoy standard quality images.
B
Component video input jacks
(Y, P
B
/C
B
, P
R
/C
R
)
You will enjoy accurate colour reproduction
and high quality images.
If your TV accepts progressive 525p/625p
format signals, use this connection and set
“PROGRESSIVE (COMPONENT OUT
ONLY)” to “ON” in “SCREEN SETUP”
(page 51) to output progressive signals.
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit
your TV screen. To change the aspect ratio,
see page 50.
To change the colour system
If the on-screen menu of the player does not
appear on the connected TV, switch the
player’s colour system to match the colour
system of the TV (NTSC or PAL).
First turn off the player by pressing
"
/
1
, and
then press
"
/
1
again while holding down
x
on the player. The player turns back on, and
the name of the colour system scrolls across
the front panel display.
Note
Do not connect a VCR, etc., between your TV and
the player. If you pass the player signals via the
VCR, you may not receive a clear image on the TV
screen. If your TV has only one audio/video input
jack, connect the player to this jack.
A
VIDEO
AUDIO
INPUT
L
R
P
R
/C
R
P
B
/C
B
Y
COMPONENT
VIDEO IN
B
Audio/video cord (supplied)
Component video
cord (not supplied)
(yellow)
TV, projector, or
audio component
(green)
TV, projector, or
audio component
(red)
(green)
(blue)
(red)
to LINE OUT (VIDEO)
l
: Signal flow
CD/DVD player
to COMPONENT
VIDEO OUT
(blue)
(yellow)
VCR
CD/DVD player
TV
Connect
directly