Sony DVP-NS305, Руководство по обслуживанию

Страница: 12 / 108

1-4
16
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord in the order (
1
~
3
) shown below.
Be sure to connect the power cord last.
*
If you are connecting a VCR and your TV
has only one available input jack
(DVP-NS415 only)
If your TV has only one available input jack,
connect your VCR or similar device to the
LINE IN jacks on the player. In order to view
the pictures from your VCR, the DVD player
must be in standby mode. Note that the DVD
player will only pass signals through the
LINE jacks and will not output the VCR
signals from any other jack.
If your TV has more than one available input
jack, connect your VCR directly to your TV.
When connecting to a wide screen TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 59.
When connecting to a monaural TV
Use a stereo-mono conversion cord (not
supplied). Connect the LINE OUT (VIDEO)
jack on the player to the TV’s video input
jack, and connect the LINE OUT L/R
(AUDIO) jacks to the TV’s audio input jack.
PCM/DTS/
DOLBY DIGITAL S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO-L VIDEO
R-AUDIO-L
IN
OUT VIDEO
DIGITAL OUT LINE
PR
PB
Y
VIDEO
L
AUDIO
R
INPUT
R-AUDIO-L VIDEO
R-AUDIO-L
IN
OUT VIDEO
LINE
IN
OUT
to LINE IN
(VIDEO)
to audio
output
1
Audio/video cord
(supplied)
2
Power source
CD/DVD Player
to video
output
to LINE IN
L/R (AUDIO)
to video input
to audio input
VCR
TV
to LINE OUT
(VIDEO)
to LINE OUT
L/R (AUDIO)
3
Power source
If you are connecting to a VCR and your TV has
only one available input jack * (DVP-NS415 only)
17
Si
m
p
le
St
art
G
u
id
e
Step 4: Playing a Disc
A
Turn on the TV.
B
Press
[
/
1
on the player.
C
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
D
Press
A
on the player to open the
disc tray.
E
Place the disc on the tray with the
playback side facing down.
F
Press
H
.
The disc tray closes and the player begins
playing the disc.
After Step 6
Depending on the disc, a menu may be
displayed on the TV screen. If so, select the
item you want from the menu and play the
DVD (page 32) or VIDEO CD disc (page 32).
To stop playing
Press
x
.
To remove the disc
Press
A
.
To turn off the player
Press
[
/
1
. The player enters standby mode
and the power indicator lights up in red.
With the playback side facing down
18
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords, check that you have all of the supplied accessories,
and insert the batteries into the remote (page 15).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns
A
through
C
, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
PCM/DTS/
DOLBY DIGITAL S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO-L VIDEO
R-AUDIO-L
IN
OUT VIDEO
DIGITAL OUT LINE
P R
P B
Y
B
A
C
INPUT
S VIDEO
P
R
P
B
Y
COMPONENT
VIDEO IN
VIDEO
AUDIO
INPUT
L
R
l
: Signal flow
Component video cord
(not supplied)
(yellow)
Audio/video cord
(supplied)
TV, projector or AV
amplifier (receiver)
CD/DVD player
TV, projector or AV
amplifier (receiver)
(green)
S VIDEO cord
(not supplied)
TV, projector or AV
amplifier (receiver)
(red) (blue)
(yellow)
(green)
(blue)
(red)
to LINE OUT (VIDEO)
19
H
ook
up
s
A
If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are
connecting to a TV only.)
B
If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C
If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, P
B
, P
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate color reproduction and high quality images.
Notes
• Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a
clear image on the TV screen.
• If your TV has only one available audio/video input jack, connect the VCR to the LINE IN jacks on the
player (DVP-NS415 only). In order to view the pictures from your VCR, the DVD player must be in
standby mode (page 16).
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
Green
Blue
Red
Green
Blue
Red
VCR
CD/DVD player
TV
Connect
directly
VCR TV CD/DVD player