32
DVP-CX777ES
5. Auto Adjustment
Auto Adjustment
1. Auto TRK. Offset
2. Auto FCS Balance
3. Auto Focus Offset
4. Auto Focus Gain
5. Auto TRK. Gain
6. Auto EQ.
7. Auto L.F. Offset
8. Auto Group Delay
9. Auto TRK. Balance
_
SA.------ SI.-- EMG.00
DVD SL 12cm
Jitter FF
On this screen, each item can be adjusted automatically. Select the
desired number
[1]
to
[8]
from the remote commander, and se-
lected item is adjusted automatically.
[1]
Auto TRK. Offset
: Adjusts tracking offset.
[2]
Auto FCS Balance : Adjusts focus balance.
[3]
Auto Focus Offset
: Adjusts focus offset.
[4]
Auto Focus Gain
: Adjusts focus gain.
[5]
Auto TRK. Gain
: Adjusts track gain.
[6]
Auto EQ
: Adjusts EQ.
[7]
Auto L.F. Offset
: Adjusts loop filter offset.
[8]
Auto Group Delay
: Adjusts amount of group delay.
[9]
Auto TRK. Balance : Adjusts tracking balance.
6. Memory Check
The display image is shown below and three screens in total can
be selected.
EEPROM Data 1
-- DL --
CD LCD SL L0 L1
Focus Gain xx xx xx xx xx
TRK. Gain xx xx xx xx xx
FCS Balance xx xx xx xx xx
Focus Bias xx xx xx xx xx
TRV. Offset xx xx xx xx xx
L.F. Offset xx xx xx xx xx
EQ. Boost xx xx xx xx xx
_ UP : Last Data
DOWN : Next Data
CLEAR : Default Set
page.1/3
EEPROM Data 2
-- DL --
CD LCD SL L0 L1
RF Jitter xx -- xx xx xx
RF Level xx -- xx -- --
FE Level xx -- xx -- --
FE Balance xx -- xx -- --
TRV.Level xx -- xx -- --
TE Gain xx xx -- -- --
PI Level xx -- xx xx --
_ UP : Prev Data
DOWN : Next Data
CLEAR : Default Set
page.2/3
EEPROM Data 3
-- DL --
CD LCD SL L0 L1
Analog FRSW xx xx xx xx xx
PLL Dac Gain xx xx xx xx xx
Mirror Time xx xx xx xx xx
TRK. Balance xx xx xx xx xx
THR A&L : xx xx xx/xx xx xx
_ UP : Prev Data
DOWN : First Data
CLEAR : Default Set
page.3/3
On this screen, current servo adjusted data stored in the EEPROM
are displayed. The adjusted data are initialized by pressing the
[CLEAR]
key, but be careful that they are not recoverable after
initialization.
Before clearing the adjusted data, make a note of the set data. This
screen will also appear if
[0]
All is selected in the Drive Auto
Adjustment. In this case, default setting cannot be made.
“THR A&L” data on the third page cannot be changed if default
setting is once made.
