background image

Specifications

9

Specifications

General

LCD

Performance

Connector

Supplied accessories

Related accessories

Design and specifications are subject to change without 
notice.

Power supply

10.5 V to 17.0 V DC (supplied from the camera)

Power consumption

1.2 W

Operating temperature

0 °C to 40 °C (32 °F to 104 °F)

Storage temperature

–20 °C to +60 °C (–4 °F to +140 °F)

Mass

Approx. 660 g (1 lb 7.3 oz)

Dimensions

 

3.5-inch color TFT transmissive LCD
Display area

76.8 × 43.2 mm (3 

1

/

8

 × 1 

3

/

4

 inches) (H/V, 16:9 

aspect ratio)

Brightness

300 cd/m

2

 (peak brightness, typical)

Resolution

960 × 540

Color temperature

D65

Rectangular 26-pin connector (1)

Before Using this Unit (1)
Operating Instructions (CD-ROM) (1)
Warranty (1)

Solid-State Memory Camcorder

PMW-F5, PMW-F55

Unit: mm (inches)

87 (3

1

/

2

)

215 (8 

1

/

2

)

242 (9 

5

/

8

)

Notes

• Always verify that the unit is operating properly 

before use. SONY WILL NOT BE LIABLE FOR 
DAMAGES OF ANY KIND INCLUDING, BUT 
NOT LIMITED TO, COMPENSATION OR 
REIMBURSEMENT ON ACCOUNT OF THE 
LOSS OF PRESENT OR PROSPECTIVE PROFITS 
DUE TO FAILURE OF THIS UNIT, EITHER 
DURING THE WARRANTY PERIOD OR AFTER 
EXPIRATION OF THE WARRANTY, OR FOR 
ANY OTHER REASON WHATSOEVER.

• SONY WILL NOT BE LIABLE FOR CLAIMS OF 

ANY KIND MADE BY USERS OF THIS UNIT OR 
MADE BY THIRD PARTIES.

• SONY WILL NOT BE LIABLE FOR THE 

TERMINATION OR DISCONTINUATION OF 
ANY SERVICES RELATED TO THIS UNIT THAT 
MAY RESULT DUE TO CIRCUMSTANCES OF 
ANY KIND.

Содержание DVF-L350











Отзывы: