76
Dubbing only desired scenes- Digital program editing
(
10
)
Turn the SEL/PUSH EXEC dial to select “CUT-IN,” then press the dial.
(
11
)
Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-IN,
then press the dial.
The calculated start position for recording is set.
(
12
)
Turn the SEL/PUSH EXEC dial to select “CUT-OUT,” then press the dial.
(
13
)
Turn the SEL/PUSH EXEC dial to select the average numerical value of CUT-OUT,
then press the dial.
The calculated stop position for recording is set.
(
14
)
Turn the SEL/PUSH EXEC dial to select
RETURN, then press the dial.
Errors in editing
If you connect your camcorder to Sony equipment with the DV jack, the range of errors
is /– 5 frames.
The range may become wider in the following conditions:
•The interval between CUT-IN and CUT-OUT is less than five seconds (p. 77).
•CUT-IN or CUT-OUT is set at the beginning of the tape.
10,11
12,13
ED I T SET
ADJ TEST
“CUT–I N”
“CUT–OUT”
RETURN
[MENU] : END
0
OTHERS
ED I T SET
ADJ TEST
“CUT–I N”
“CUT–OUT”
RETURN
[MENU] : END
0
OTHERS
ED I T SET
ADJ TEST
“CUT–I N”
“CUT–OUT”
RETURN
[MENU] : END
0
OTHERS
ED I T SET
ADJ TEST
“CUT–I N”
“CUT–OUT”
RETURN
[MENU] : END
0
OTHERS