background image

3

For the customers in the U.S.A.

This equipment has been tested and found 
to comply with the limits for a Class A 
digital device, pursuant to Part 15 of the 
FCC Rules.  These limits are designed to 
provide reasonable protection against 
harmful interference when the equipment is 
operated in a commercial environment.  
This equipment generates, uses, and can 
radiate radio frequency energy and, if not 
installed and used in accordance with the 
instruction manual, may cause harmful 
interference to radio communications.  
Operation of this equipment in a residential 
area is likely to cause harmful interference 
in which case the user will be required to 
correct the interference at his own expense.

You are cautioned that any changes or 
modifications not expressly approved in 
this manual could void your authority to 
operate this equipment.

All interface cables used to connect 
peripherals must be shielded in order to 
comply with the limits for a digital device 
pursuant to Subpart B of Part 15 of FCC 
Rules.

This device complies with Part 15 of the 
FCC Rules.  Operation is subject to the 
following two conditions: (1) This device 
may not cause harmful interference, and (2) 
this device must accept any interference 
received, including interference that may 
cause undesired operation.

For the customers in Canada

This Class A digital apparatus complies 
with Canadian ICES-003.

For the customers in Europe

This product with the CE marking complies 
with the EMC Directive issued by the 
Commission of the European Community. 
Compliance with this directive implies 
conformity to the following European 
standards:
• EN55103-1: Electromagnetic 

Interference (Emission)

• EN55103-2: Electromagnetic 

Susceptibility (Immunity)

This product is intended for use in the 
following Electromagnetic Environments: 
E1 (residential), E2 (commercial and light 
industrial), E3 (urban outdoors), E4 
(controlled EMC environment, ex. TV 
studio).

The manufacturer of this product is Sony 
Corporation, 1-7-1 Konan, Minato-ku, 
Tokyo, Japan.
The Authorized Representative for EMC 
and product safety is Sony Deutschland 
GmbH, Hedelfinger Strasse 61, 70327 
Stuttgart, Germany. For any service or 
guarantee matters please refer to the 
addresses given in separate service or 
guarantee documents. 

Pour les utilisateurs au Canada

Cet appareil numérique de la classe A est 
conforme à la norme NMB-003 du Canada.

Содержание DVCAM DSBK-2020K

Страница 1: ...tion 設置説明書 JP Installation Instructions GB IT ES お買い上げいただきありがとうございます 電気製品は安全のための注意事項を守らないと 火災や人身事故になることがあります ご使用にあたっては デジタルビデオカセットレコーダー本体 に付属の取扱説明書の 安全のために と をよくお読みください お読みになったあとは い つでも見られるところに必ず保管してください 本基板の取り付けは 必ずお買い上げ店またはソニーのサービ ス窓口にご依頼ください DSBK 2020K ...

Страница 2: ...face and HD up converter functions Refer to the DSR 2000 2000P Operating Instructions for the i LINK function This kit provides a function equivalent to that of the DSBK 190 i LINK DV Input Output Board Refer to the supplied DSBK 2020 Installation Instructions for the HD up converter functions Installing this kit requires the DSR 2000 2000P to be modified To install the kit in the VCR consult your...

Страница 3: ...is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation For the customers in Canada This Class A digital apparatus complies with Canadian ICES 003 For the customers in Europe This product with the CE marking complies with the EMC Directive issued by ...

Страница 4: ...lemagne Pour toute question concernant le service ou la garantie veuillez consulter les adresses indiquées dans les documents de service ou de garantie séparés Für Kunden in Europa Dieses Produkt besitzt die CE Kennzeichnung und erfüllt die EMV Richtlinie der EG Kommission Angewandte Normen EN55103 1 Elektromagnetische Verträglichkeit Störaussendung EN55103 2 Elektromagnetische Verträglichkeit Stö...

Отзывы: