Sony DSX-A55BT, Руководство по эксплуатации

Страница: 26 / 88

26
GB
The phone is not connected.

When BLUETOOTH audio is played, the phone
is not connected even if you press
(handsfree).

Connect from the phone.
The phone sound quality is poor.

Phone sound quality depends on reception
conditions of cellular phone.

Move your car to a place where you can
enhance the cellular phone’s signal if the
reception is poor.
The volume of the connected audio device is
low (high).

Volume level will differ depending on the
audio device.

Adjust the volume of the connected audio
device or this unit.
The sound skips during playback of a
BLUETOOTH audio device.

Reduce the distance between the unit and
the BLUETOOTH audio device.

If the BLUETOOTH audio device is stored in a
case which interrupts the signal, remove the
audio device from the case during use.

Several BLUETOOTH devices or other devices
which emit radio waves are in use nearby.

Turn off the other devices.

Increase the distance from the other
devices.

The playback sound stops momentarily when
the connection between this unit and the
cellular phone is being made. This is not a
malfunction.
The connected BLUETOOTH audio device
cannot be controlled.

Check that the connected BLUETOOTH audio
device supports AVRCP.
Some functions do not work.

Check if the connecting device supports the
functions in question.
A call is answered unintentionally.

The connecting phone is set to answer a call
automatically.
Pairing failed due to time out.

Depending on the connecting device, the
time limit for pairing may be short.

Try completing the pairing within the time.
BLUETOOTH function cannot operate.

Turn off the unit by pressing OFF for more
than 2 seconds, then turn the unit on again.
No sound is output from the car speakers
during handsfree call.

If the sound is output from the cellular phone,
set the cellular phone to output the sound
from the car speakers.
Error displays/Messages
CHECKING

The unit is confirming the connection of a
USB device.

Wait until confirming the connection is
finished.
ERROR

There may be an internal malfunction.

Press OFF for more than 2 seconds (the
display disappears), then press OFF again.
ERROR-99

There may be an internal malfunction.

Press OFF for more than 2 seconds (the
display disappears), then press OFF again.
If the error indication remains on in the
display, consult your nearest Sony dealer.