Sony DSR-PD198P, Руководство по обслуживанию

Страница: 213 / 458

6-43
HVR-Z5C/Z5E/Z5J/Z5N/Z5P/Z5U
29. White Defect & HS Defect Adjustment
RadarW
RadarW
RadarW
RadarW
RadarW
Detect white defective pixels of CMOS image sensor.
Subject Not required
Measurement Point Adjusting remote commander
Measuring Instrument
Specified value Data of page: 6 address: D3 is “00”
Note 1: Perform “STD GAIN Adjustment” before this adjustment.
Note 2:
Check that the data of page: 0, address: 10 is “00”.
Note 3: Check that the data of page: 6, address: 02 is “00”.
If not, select page: 6, address: 01, set data: 00, and press
PAUSE (Write) button.
Switch setting
1) POWER ......................................................... CAMERA mode
Preparation for adjustment:
1) Before starting the adjustment, perform the aging to raise the
temperature so that the set becomes ready for adjustment.
Aging temperature judge mode:
Order Page Address Data Procedure
1 0 01 01
2 0 10 09
3
F
5D 1D Press PAUSE (Write) button.
(9F)
4
During the aging, the screen
will be as follows.
(Fig. 6-1-13)
5
When the aging completed,
execute the subsequent steps
to exit the aging temperature
judge mode.
6
F
5D 00 Press PAUSE (Write) button.
(9F)
7 0 10 00
8 0 01 00
Fig.6-1-12
CMOS temperature checking method:
Order Page Address Data Procedure
1 0 FF 06
2 7 78 Check the data is “00”.
3 7 79
Check the data is “1D” to
“2A”. (Note 4)
4 0 FF 00
Note 4: If the data is other than “1D” to “2A”, perform the aging.
Adjusting method:
Order Page Address Data Procedure
1 0 01 01
2 6 02 Check the data is “00”.
3 6 07 Check the data is “04”.
4 6 D0 81
5 6 01 21 Press PAUSE (Write) button.
6 6 02
Check the data changes to
“01”.
7 6 01 00 Press PAUSE (Write) button.
8 6 D0 06
9 6 01 21 Press PAUSE (Write) button.
10 6 02
Check the data changes to
“01”.
11 6 D3 Check the data is “00”.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE (Write) button.
2 0 01 00
Aging completed
(Exceeding the set
temperature)
Excessive aging
(Exceeding appropriate
adjustment temperature)
During aging
(Below the set temperature)