2-23E
DSLR-A200_L2
2-11.CLEANING PROCEDURE OF OLPF
<Preparation>
Make it to Cleaning Mode of Power On/Set Up Menu by using the AC power supply.
(It comes to Mirror Up/Shutter Open)
Note:
Use the AC power supply absolutely.
<Cleaning Method>
1.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning
jig (J-6082-635-A).
2.
Surface of OLPF is cleaned. (Note that there is no wipe irregularity)
3.
Power off. (It comes to Shutter Close/Mirror Down)
Note:
The cleaning of the OLPF must use a specified jig. If the specified jig is not used, the low pass filter might be
damaged.
OLPF
Cleaning Jig
(J-6082-635-A)
Cleaning Cloth
(J-6082-636-A)
Cut
EE3310
Содержание DSLR-A200 (DSLR-A200)
Страница 54: ...DSLR A200_L2 Schematic diagrams of the AM 013 board is not shown Pages from 4 7 to 4 25 are not shown ...
Страница 73: ...DSLR A200_L2 Printed wiring boards of the AM 013 board is not shown Pages 4 43 and 4 44 are not shown ...
Страница 99: ...DSLR A200_L2 Electrical parts list of the AM 013 board is not shown Page 5 16 to 5 22 is not shown ...