82
“---- -- --” is printed on the date-inserted part of the image.
•
Images that do not have the recording data cannot be printed with the date inserted. Set [Date]
to [Off] and print the image again (page 67).
Cannot select the print size.
•
Consult the printer manufacturer as to whether the printer can provide the desired size.
Cannot print the image at the size selected.
•
If you have changed the paper size after having the USB cable connected, then connect the
printer again.
•
The print setting of the camera differs from that of the printer. Change the setting of either the
camera (page 67) or the printer.
Cannot operate the camera after canceling printing.
•
Wait for a while as the printer is carrying out the cancellation. It may take some time
depending on the printer.
Your camera does not work.
•
Use the type of batteries you can use with this camera (page 88).
•
The battery level is low (The
E
indicator appears). Install new batteries or charged Nickel-
Metal Hydride batteries (not supplied).
The power is on, but the camera does not work.
•
The built-in microcomputer is not working properly. Remove the batteries, and then, after one
minute, insert the batteries and turn on the camera.
Cannot identify an indicator on the screen.
•
See page 18.
The lens gets fogged.
•
Moisture condensation has occurred. Turn off the camera and leave it for about an hour before
using it (page 90).
The camera becomes warm when you use it for a long time.
•
This is not a malfunction.
The lens does not move when you turn off the camera.
•
The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries
or use the AC Adaptor (not supplied).
Others
