10
Charging the battery pack
,
Open the battery/“Memory
Stick” cover.
Slide the cover in the direction of the arrow.
• Be sure to turn off your camera when
charging the battery pack (page 14).
•
Your camera operates with the
“InfoLITHIUM” NP-FC11 battery pack (C
type) (supplied). You can use only C type
battery pack (page 109).
,
Install the battery pack, then
close the battery/“Memory
Stick” cover.
Insert the battery pack with the
B
mark
facing toward the battery compartment as
illustrated.
Make sure the battery pack is firmly
inserted all the way, then close the cover.
•
The battery pack is easily inserted by pushing
the battery eject lever at the front of the battery
compartment down.
,
Open the jack cover and
connect the AC-LS5 AC
Adaptor (supplied) to the DC IN
jack of your camera.
Open the cover in the arrow direction as
illustrated above. Connect the plug with the
v
mark facing up.
•
Do not short the DC plug of the AC Adaptor
with a metallic object, as this may cause
malfunction.
•
Clean the DC plug of the AC Adaptor with a
dry cotton bud. Do not use the dirty plug. Use
of the dirty plug may not properly charge the
battery pack.
1
2
Battery eject lever
3
DC plug
AC
Adaptor
Jack cover
Getting started