11
Set
u
p
Connection through i.LINK
Note
This product including bundled software functions properly under Windows XP, Windows
2000.
It may not fulfill all functional and performance specification under other OS (operating
system) environment.
• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with an i.LINK connector, install an i.LINK
interface card.
• Check the type of i.LINK connector provided with your computer's i.LINK
interface and obtain a compatible i.LINK cable. This drive uses a 6-pin
i.LINK connector.
• Have the manual for your computer handy.
• If you connect the drive to a computer with multiple i.LINK connectors, see
“Connection Using i.LINK” on page 15.
These instructions apply to most commonly used computers.
CAUTION
• Avoid touching any exposed electronic conductors or contacts on the circuit boards of the
drive or within the computer. These parts can be damaged by electrostatic discharges from
your body.
• Before making connections, touch the metal chassis of your computer to discharge any
static electricity from your body.
Before Connection
Installation
i.LINK S400 connector (4-pin)
i.LINK S400 connector (6-pin)
