background image

— 2 —

DPP-FP95

SPECIFICATIONS

These specifications are extracted from Operating
Instructions of DPP-FP85/FP95 (3-285-420-12 (1)).

 Printer

Printing method

Dye sublimation printing
(Yellow/Magenta/Cyan 3 pass)

Resolution

300 (H) 

×

 300 (V) dpi

Image processing per dot

256 levels processing
(8 bits for eachYellow/Magenta/Cyan)

Printing range

1 800 dots 

×

 1 200 dots

Printing size

P (Post Card/4 

×

 6 inch) size:

101.6 

×

 152.4 mm (maximum, borderless)

Printing time (per sheet)

Memory card

 *1 *2 *3 *4 

: Approx. 45 sec.

PictBridge

 *3 *5 

: Approx. 58 sec.

Via PC

 *6 

: Approx. 45 sec.

Input/Output connectors

HDMI OUT (output) connector

A-TYPE connector,
1 080i (59.94Hz)/1 080i (50Hz)/
720p (59.94Hz)/720p (50Hz)/576p (50Hz)/
480p (59.94Hz) compatible,
BRAVIA Sync compatible

USB (USB 2.0 High Speed) for PC connection
PictBridge/EXT INTERFACE connector

Slot

“Memory Stick” insertion slot
SD Card/xD-Picture Card insertion slot
CompactFlash card insertion slot

Compatible image file formats

JPEG: DCF 2.0 compatible, Exif 2.21

  compatible, JFIF*7

TIFF: Exif 2.21 compatible
BMP

 *8 

: 1, 4, 8, 16, 24, 32 bits Windows format

Some image file formats are not compatible.

Maximum number of pixels to be
handled

8 000(H) 

×

 6 000(V) dots

(Excluding “Index Print” and part of
  “CreativePrint”)

File system

FAT12/16/32, sector size 2048 bytes or smaller

Image file name

DCF format, 256 characters, 8th or less
hierarchy

Maximum number of files to be
handled

9 999 files for a memory card/external device

Ink ribbon/Print Paper

Please use a Sony optional color print pack
designed for the printer.

LCD screen

LCD panel:

9.0 cm (3.6 type) TFT drive

Total number of dots:

230 400 (320 RGB 

×

 240)

Power requirements

DC IN jack, 

 24 V

Power consumption

While printing: 83 W (maximum)
On standby mode: less than 1W

Operating temperature

°

C to 35 

°

C (41 

°

F to 95 

°

F)

Dimensions

Height :Approx. 67 mm (2 5/8 inches)
Width :Approx. 180 mm (7 1/8 inches)
Depth :Approx. 137 mm (5 1/2

 

inches)

(excluding a handle)
Approx. 149 mm (5 7/8

 

inches)

(including a handle)

Depth when the paper tray is installed:
Approx. 317 mm (12 1/2 inches)

Mass

Approx. 1.2 kg (2 lb 10 oz)

(excluding the paper tray, ink ribbon,
  AC adaptor)

Supplied accessories

• Paper tray
• AC adaptor
• AC power cord

 *9

• Cleaning cartridge / Cleaning sheet
• CD-ROM (Windows Printer Driver Software

Ver.1.0 and Picture Motion Browser Ver.3.0)

• Operating Instructions
• Read This First
• About the Print Packs
• Warranty (In some regions, the warranty is

not supplied.)

• Sony End User Software License Agreement

 AC adaptor AC-S2422

Power requirements

~ 100 V to 240 V, 50/60 Hz, 1.5 A to 0.75 A

Rated output voltage

 24 V 2.2 A (2.2A)

Peak 3.7 A 6.5 s

Operating temperature

°

C to 35 

°

C (41 

°

F to 95 

°

F)

Dimensions

Approx. 60 

×

 30.5 

×

 122 mm

(2 3/8 

×

 1 1/4 

×

 4 7/8 inches)

(w/h/d, excluding protruding parts and cables)

Mass

Approx. 305 g (11 oz)

Design and specifications are subject to change
without notice.

* The total number of sheets of P size print paper

that the printer can print is estimated to be
approximately 2,000. For the total number of
sheets, please check “Printer information
display” of the “Display/Printer setup” menu.

*1: Print Settings: Borderless, Date Print: Off,

Auto Fine Print5: On (Photographic) (When
displaying on the LCD screen)

*2: When printing a photo (Approx.4.37 MB file

size) taken by a Sony digital still camera
containing effective picture elements of
approximately 12,100,000 or equivalent.

*3: Print Speed: Time from when the PRINT

button is pressed to when printing is finished.
(The printing time may vary depending on a
used equipment, a format of an image, a used
memory card, settings of an application and
operating conditions.)

*4: When printing from a “Memory Stick PRO

Duo” inserted in the printer’s slot

*5: When printing via DSC-W200 connected by

USB cable. Time from when the PRINT button
on the OSD of the camera is pressed to when
the printing is finished.

*6: The time for data processing and transferring

is excluded.

*7: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0

format

*8: You cannot print using the Picture Motion

Browser.

*9: The plug shape and specifications of the AC

power cord differ depending on the region in
which you purchased the printer.

Содержание DPP-FP95
























Отзывы: