1-14
DNW-A25WS/A25WSP
Hook
Driver
Hole
Display panel
Control panel
Cassette compartment
Manual eject
knob (red)
Turn while
pushing down
Capstan cap
1-12. How to Take Out the Cassette Whose Tape is Slacked
1.
Open the display panel.
2.
To open the control panel, insert a screwdriver into the rectangular hole and unhook as shown in the
figure.
3.
Turn the manual eject knob (red) counterclockwise while pushing down it.
4.
When the tape is starting to slack, turn the capstan cap counterclockwise to take up the tape to the T
reel.
5.
Repeat steps 3 and 4 until the cassette compartment is opened.
m
.
Stop turning the manual eject knob just when the cassette compartment is opened.
.
If the cassette compartment cannot be closed after taking the tape out by the above procedure, try to
turn the manual eject knob clockwise two or three turns while pushing down.
1-12. How to Take Out the Cassette Whose Tape is Slacked
