Sony DNW-A25WS, Руководство по эксплуатации

Страница: 124 / 172

6-3 Extended Menu
6-20
Setup Menu
Chapter 6 Setup Menu
Menu items in the 400s, relating to preroll
Item number Item name Settings
401
FUNCTION MODE
AFTER CUE-UP
402
TIME REFERENCE
FOR PREROLL When prerolling a tape section at which timecode
signals are discontinuous, select which to use, the
timecode or CTL signals recorded preceding the
section, for timecode advance and preroll.
CTL : Using CTL signals.
TC: Using timecode signals.
Select the state that the unit goes into after a cuing-
up operation.
STOP : Stops (the “STOP mode”).
STILL: Still playback (in search mode).
Note
When controlling this unit from an editor with the
standard constants set, select “STOP”.
Select whether or not the edit IN point is
automatically set by pressing the PREROLL button
when the IN point is not set before starting preroll.
DIS : IN point is not set automatically.
ENA: IN point is set automatically.
AUTOMATIC
PREROLL
REFERENCE ENTRY
403
Menu items in the 500s, relating to tape protection
Item number Item name Settings
501
STILL TIMER
Select the time delay from the tape transport
stopping (either the “STOP” mode” or the still
playback mode in search mode) until the unit
automatically switches to the tape protection mode,
in order to protect the rotary heads and the tape.
0.5S... 8M ...30M: Set the value in the range 0.5
seconds to 30 minutes.
502 TAPE PROTECTION
MODE FROM
SEARCH Select the operation of the protection mode to
protect the rotary heads and tape when in the still
playback mode in search (jog/shuttle/variable)
mode.
STEP : Step forward at 1 /
30
normal speed every 2
seconds.
STDBY: Switch to “Standby OFF mode” (the unit
not on standby).