DNW-A100
DNW-A50
DNW-A45
General
Power requirements
AC 100V to 240V, 50/60Hz
Power consumption
320W
300W
Operating temperature
+5°C to +40°C (+41°F to +104°F)
Storage temperature
-20°C to +60°C (-4°F to +140°F)
Humidity
25% to 80% (relative humidity)
Mass
35kg (77 lb 3 oz)
Dimensions (W x H x D)
427 x 237 x 524mm (16 7/8 x 9 3/8 x 20 3/4 inches)
Tape transport system
Recording format
Betacam SX
Tape speed
Betacam SX
59.515mm/s
Betacam playback
118.6mm/s
Digital record/playback time
Max. 194 min with BCT-194SXLA cassette
Fast forward/rewind time
Approx. 3 min with BCT-194SXLA cassette
Smooth JOG speed range
-1 to +1 times normal playback speed
Search speed range (shuttle mode)
±50 times normal playback speed
Servo lock time
0.5s or less (from standby on)
Load/unload time
6s or less
Disk system
Record/playback time
90 min
45 min
Smooth JOG speed range
-1 to +1 times normal playback speed
Search speed range
±100 times normal playback speed
Minimum duration of Edit EVENT
0.5s
Maximum record/feed speed
4 times normal playback speed
1 times normal playback speed
Inputs/Outputs
Video inpu
tSDI
BNC (x1) with active through out, SMPTE259M, 270Mbits/s
SDDI (option)
BNC (x1), with use of optional
BKNW-103 input board
Analog component (option) *
BNC (x3 for 1 set, Y/R-Y/B-Y), with use of optional BKNW-104 input board
Y: 1.0Vp-p, 75
Ω
, sync negative R-Y/B-Y: 0.7Vp-p, 75
Ω
Analog composite (option) *
BNC (x2 in loop through), 1.0Vp-p, 75
Ω
, sync negative
with use of optional BKDW-505
Reference
BNC (x2 in loop through), 0.3Vp-p, 75
Ω
, sync negative
Video output
SDI
BNC (x2), SMPTE259M, 270Mbits/s
SDDI
BNC (x2)
Analog component
BNC (x3 for 1 set, Y/R-Y/B-Y), Y: 1.0Vp-p, 75
Ω
, sync negative, R-Y/B-Y: 0.7Vp-p, 75
Ω
Analog composite
BNC (x3, including one character out), 1.0Vp-p, 75
Ω
, sync negative
Audio input
Digital (CH 1/2, 3/4)
SDI-embedded
BNC (x1, video & audio), SMPTE259M, 270Mbits/s
AES/EBU **
BNC (x 2), stereo mode, with use of optional BKNW-105 board
Analog (CH 1,2,3,4) **
XLR-3-31 type (x4)
LOW OFF: -60dBu, high impedance, balanced
HIGH OFF: +4dBu, high impedance, balanced
HIGH ON: +4dBu, 600
Ω
termination, balanced
Audio output
Digital (CH 1/2, 3/4)
SDI-embedded
BNC (x1, video & audio), SMPTE259M, 270Mbits/s
AES/EBU **
BNC (x 2), stereo mode, with use of optional BKNW-105 board
Analog (CH 1,2,3,4) **
XLR-3-32 type (x4), +4dBu at 600
Ω
load, low impedance, balanced
Headphones
JM-60 stereo phone jack, -
∞
to -12dBu at 8
Ω
load, unbalanced
Monitor L/R
XLR-3-32 type (x2), +4dBu at 600
Ω
load, low impedance, balanced
Time code
Input
XLR-3-31 type (x1), 0.5 to 18Vp-p, 10k
Ω
, balanced
Output
XLR-3-32 type (x1), 2.2Vp-p, low impedance, balanced
Remote
Remote 1 (In/Out)
D-sub 9-pin, Sony 9-pin interface
RS-232C
D-sub 25-pin, RS-232C interface
SCSI
68-pin, female
Video control
D-sub 15-pin (for the optional BVR-50 Remote Controller)
Processor adjustment range
Video level
±3dB/-
∞
to 3dB selectable
Chroma level
±3dB/-
∞
to 3dB selectable
Set up/Black level
±30IRE/±210mv
Chroma phase/hue
±30°
System sync phase
±15µs
System SC phase
±200ns
Y/C delay
±100ns (Betacam/Betacam SP playback only)
Composite input
±3dB
Digital video performance
Sampling frequency
Y: 13.5MHz, R-Y/B-Y: 6.75MHz
Quantization
8 bits/sample
Error correction
Reed-Solomon code
Digital input to analog component output
K-factor (2T pulse):1% or less
Analog component input (option) to analog component output
Input A/D quantization:8 bits/sample
K-factor (2T pulse):1% or less
LF non-linearity:3% or less
Analog composite input (option) to analog composite output
Differential gain:2% or less
Differential phase:2°or less
Y/C delay:15ns or less
K-factor (2T pulse):1% or less
Digital audio performance
Sampling frequency
48kHz (synchronized with video)
Quantization
16 bits/sample
Analog input to output A/D and D/A quantization
16 bits/sample
Frequency response (0dB at 1kHz)
20Hz to 20kHz +0.5dB/-1.0dB
Dynamic range (at 1kHz, emphasis ON)
More than 90dB
Distortion (at 1kHz, emphasis ON, reference level)
Less than 0.05%
Cross talk (at 1kHz, between any two channels)
Less than -80dB
Wow & flutter
Below measurable level
Head room
20dB (18dB selectable)
Emphasis (ON/OFF selectable in REC mode)
T1=50µs , T2=15µs
* Either analog component or composite input can be selected as an option.
** AES/EBU audio input can be selected as an option to replace analog audio.
Specifications
