Sony Digital Handycam DCR-PC100E, Руководство по обслуживанию

Страница: 172 / 215

5-53
• ENC Ca BIST(PB) Check
35) Select page: 3, address: 10, set data: 8D, and press the PAUSE
button.
36) Select page: 3, address: 12, set data: 10, and press the PAUSE
button.
37) Select page: 3, address: 12, set data: 00, and press the PAUSE
button.
38) Select page: 3, address: 13, set data: 04, and press the PAUSE
button.
39) When the playback system from IC1501(VFD) to IC1402 (AOI)
is normal, the display data (combination data) of page: 3,
address: 16 and 17 agrees with any combination as shown
below.
NTSC model PAL model
• ENC Cb BIST(PB) Check
40) Select page: 3, address: 10, set data: 8E, and press the PAUSE
button.
41) Select page: 3, address: 12, set data: 10, and press the PAUSE
button.
42) Select page: 3, address: 12, set data: 00, and press the PAUSE
button.
43) Select page: 3, address: 13, set data: 04, and press the PAUSE
button.
44) When the playback system from IC1501(VFD) to IC1402 (AOI)
is normal, the display data (combination data) of page: 3,
address: 16 and 17 agrees with any combination as shown
below.
NTSC model PAL model
45) Select page: C, address: 51, set data: 03, and press the PAUSE
button.
46) Select page: C, address: 60, and set data: 08, and press the
PAUSE button.
47) Select page: 0, address: 01, and set data: 00.
2. Recording System Check
2-1. Preparations for recording
1) Playback the BIST check tape.(XH5-6(NTSC), XH5-6P(PAL))
2) Select page: 3, address: 10, set data: C0, and press the PAUSE
button.
3) Select page: 3, address: 11, set data: 07, and press the PAUSE
button.
4) Enter the stop mode.
5) While keep the HOLD switch of the adjusting remote
commander at ON(SERVICE) position, eject the BIST check
tape and insert a tape for recording in place of the tape.
6) Enter the camera recording mode.
Note: Perform the following checks in the camera recording mode.
2-2. IC1501(VFD) BIST(REC) Check
1) Select page: 3, address: 12, set data: 10, and press the PAUSE
button.
2) Select page: 3, address: 12, set data: 00, and press the PAUSE
button.
3) Select page: 3, address: 13, set data: 04, and press the PAUSE
button.
4) When the recording system from IC1501(VFD) to IC1600(SFD)
is normal, the display data (combination data) of page: 3,
address: 14 and 15 agrees with any combination as shown
below.
NTSC model PAL model
2-3. IC1600(SFD) BIST(REC) Check
1) Select page: 0, address: 01, and set data: 01.
2) Select page: C, address: AC, set data: 21, and press the PAUSE
button.
3) Select page: C, address: AD, set data: 03, and press the PAUSE
button.
4) Select page: 3, address: 12, set data: 08, and press the PAUSE
button.
5) Select page: 3, address: 12, set data: 00, and press the PAUSE
button.
6) Select page: 3, address: 13, set data: 03, and press the PAUSE
button.
7) When the recording system from IC1600(SFD) to IC1602(LIP)
is normal, the display data (combination data) of page: 3,
address: 16 and 17 agrees with any combination as shown
below.
NTSC model PAL model
8) When the recording system from IC1600(SFD) to IC1601(TFD)
is normal, the display data (combination data) of page: 3,
address: 18 and 19 agrees with any combination as shown
below.
NTSC model PAL model
B2
E7
DE
EE
Data Address
16
17
FE
68
22
CA
Data Address
16
17
70
D5
43
E4
Data Address
16
17
ED
CB
9A
1E
Data Address
16
17
Address
14
15
Data
D5
0B
Address
14
15
Data
34
8A
00
15
BC
CE
Data Address
16
17
4C
CF
F0
14
2D
F5
A2
7B
Data Address
16
17
61
2F
EE
1A
F7
F6
4F
69
Data Address
18
19
54
80
EC
1F
6C
C7
23
76
Data Address
18
19
01
0E
4E
BF