Sony Digital betacam DVW-970, Руководство по эксплуатации

Страница: 101 / 162

101
Saving and Loading User Files
Cha
pt
er 6
Sa
v
ing an
d Load
ing Us
er Se
tt
ing
Dat
a
Do not remove the “Memory Stick” while the ACCESS
indicator is lit. You may lose data, or damage the “Memory
Stick.”
Protecting saved data
To prevent accidental erasure of important setup data, use
the LOCK switch on the “Memory Stick.”
Slide the switch right to the write protect position. The
message “MEMORY STICK LOCKED” is displayed. It is
now impossible to write or delete data on the “Memory
Stick.”
LOCK switch on the “Memory Stick”
Notes on using and storing the “Memory
Stick”
• Avoid touching the connector of the “Memory Stick” or
contacting it with a metal object.
• When attaching a label to the “Memory Stick,” use only
the label supplied for the “Memory Stick.”
• Do not drop, bend, or submit the “Memory Stick” to
external shock.
• Do not disassemble or modify the “Memory Stick.”
• Avoid getting liquids on the “Memory Stick.”
• Avoid using or storing the “Memory Stick” in a location
subject to:
—extremely high temperature such as the hot inside of a
car or the outdoors exposed to a burning sun, or a
place near a heater
—direct sunlight
— high humidity
— excessive dust
• When storing and carrying the “Memory Stick,” keep it
in its original case to ensure protection of important data.
• When carrying the camcorder with the “Memory Stick”
inserted, close the cover of the menu operating section.
• Avoid removing the “Memory Stick” from the insertion
slot while the access indicator is lit.
• Do not format the “Memory Stick” using a PC.
• Formatting of “Memory Sticks” can be performed on the
MEMORY STICK page of the FILE menu.
6-1-2 Saving USER Menu Data (User
File) to the “Memory Stick”
You can save USER menu settings held in the camcorder
as user files in the “Memory Stick.”
You can save up to 100 user files in the “Memory Stick.”
Insert the “Memory Stick,” then proceed as follows:
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
2
Turn the MENU knob until the USER FILE page
appears, then press the MENU knob to select the page.
Alternately, select “USER FILE” on the CONTENTS
page.
USER FILE page
If you want to set a file ID for the data to be saved
Set the file ID before going to step 3 .
For details on setting the file ID, see “Setting the file
ID” on page 102.
3
Turn the MENU knob to move the
b
mark to USER
FILE SAVE, and press the MENU knob.
The P00 USER SAVE page appears.
Note
MEMORY STICK OPEN button
Check that the ACCESS
indicator is not lit.
Eject button
F01 USER FILE
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :
sssssssssssssssss
USER PRESET : EXEC