Sony Digital 8 DCR-TRV120 Скачать руководство пользователя | Manualshive

Страница: 103 / 132

background image

103

Additional Information

The DV jack on this unit is an i.LINK-compliant DV input/output jack. This section
describes the i.LINK standard and its features.

What is “i.LINK”?

i.LINK is a digital serial interface for handling digital video, digital audio and other
data in two directions between equipment having the i.LINK jack, and for controlling
other equipment.
i.LINK-compatible equipment can be connected by a single i.LINK cable. Possible
applications are operations and data transactions with various digital AV equipment.
When two or more i.LINK-compatible equipment are connected to this unit in a daisy
chain, operations and data transactions are possible with not only the equipment that
this unit is connected to but also with other devices via the directly connected
equipment.
Note, however, that the method of operation sometimes varies according to the
characteristics and specifications of the equipment to be connected, and that operations
and data transactions are sometimes not possible on some connected equipment.

Note

Normally, only one piece of equipment can be connected to this unit by the i.LINK
cable (DV cable). When connecting this unit to i.LINK-compatible equipment having
two or more i.LINK jacks (DV jacks), refer to the instruction manual of the equipment to
be connected.

About the Name “i.LINK”

i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY,
and is a trademark approved by many corporations.
IEEE 1394 is an international standard standardized by the Institute of Electrical and
Electronic Engineers.

i.LINK Baud rate

i.LINK’s maximum baud rate varies according to the equipment. Three maximum baud
rates are defined:

S100 (approx. 100Mbps*)
S200 (approx. 200Mbps)
S400 (approx. 400Mbps)

The baud rate is listed under “Specifications” in the instruction manual of each
equipment. It is also indicated near the i.LINK jack on some equipment.
The maximum baud rate of equipment on which it is not indicated such as this unit is
“S100”.
When units are connected to equipment having a different maximum baud rate, the
baud rate sometimes differs from the indicated baud rate.

* What is “Mbps”?
Mbps stands for megabits per second, or the amount of data that can be sent or received
in one second. For example, a baud rate of 100Mbps means that 100 megabits of data
can be sent in one second.

About i.LINK

«
...
101
102
103
104
105
...
»

Содержание Digital 8 DCR-TRV120





































































































































Отзывы:

Нет отзывов

Похожие инструкции для Digital 8 DCR-TRV120

Бренд: Samsung Страницы: 170

Бренд: TP-Link Страницы: 2

Бренд: General Страницы: 24

DS-2CD892P (N) - IR5

Бренд: HIKVISION Страницы: 7

Бренд: Cool-Icam Страницы: 21

Бренд: VARIZOOM Страницы: 2

Бренд: Samsung Страницы: 70

Бренд: Panasonic Страницы: 44

Бренд: Panasonic Страницы: 165

Бренд: Samsung Страницы: 141

SMX-F500BN/SMX-F500RN/SMX-F500SN/SMX-F500UN

Бренд: Samsung Страницы: 127

Бренд: Samsung Страницы: 116

Бренд: Samsung Страницы: 107

Бренд: Canon Страницы: 26

Бренд: Samsung Страницы: 254

Бренд: Canon Страницы: 9

Бренд: Lumens Страницы: 40

Бренд: Vivitar Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды