![background image](http://html.mh-extra.com/html/sony/dhc-md595-mini-hi-fi-component-system/dhc-md595-mini-hi-fi-component-system_operating-instructions-manual_420524027.webp)
The MD Deck
—
Recording
27
4
Press MD
HS
.
High-speed recording starts. You cannot
monitor the recorded signal during
recording. When the recording is completed,
the CD player and the MD deck stop
automatically.
To stop recording
Press MD
x
.
If “Retry” flashes in the display
after you press MD
HS
in step 4
A reading failure has occurred, and the system is
trying to read the data again.
• If the retry was successful, the system continues
with High-Speed CD-MD Synchro Recording.
• If the condition of the inserted CD or the
system is poor, and retry fails, High-Speed CD-
MD Synchro Recording is disabled. In this
case, “NORM” flashes and the deck
automaticaly starts recording in normal CD-MD
Synchro Recording. Note that monitoring of the
recorded signal is not possible when this
occurs.
Notes
• You cannot record over existing material during
High-Speed CD-MD Synchro Recording. The
system automatically starts recording from the end
of the exisiting material.
• Make sure that the remaining recordable time on the
MD is longer than the playing time of the CD,
especially if you want to record all the tracks on the
CD.
• You cannot pause recording during High-Speed
CD-MD Synchro Recording.
• If the play mode is set to Repeat Play or Shuffle
Play, it automatically switches to normal play at
step 3.
• When recording in LP2 or LP4 Stereo mode,
recording takes approximately twice as long as
normal high-speed recording.
• The following items are either inoperative or cannot
be used during High-Speed CD-MD Synchro
Recording:
— The Auto Cut function
— The recording level specified in the Setup menu
• With the following kinds of CDs, you may
experience a reading failure or noise when recorded
to an MD:
— CDs with adhesive labels attached to them
— Irregularly shaped CDs (for example, heart- or
star-shaped)
— CDs with printed text concentrated on one side
only
— Old CDs
— Scratched CDs
— Dirty CDs
— Warped CDs
• If the following occurs during CD playback or
recording, a reading error may occur or noise may
be produced in the recorded results:
— The CD tray or other part of the system is
bumped.
— The system is placed on an uneven or soft
surface.
— The system is located near a speaker, door, or
other source of vibration.
• If the above reading errors occur, a extra track may
be created.
• If you don’t perform step 4 within about 1 minute
after pressing CD-MD SYNC HIGH in step 3, the
system returns to the original condition.
• The sound does not come from the TAPE OUT
jacks during High-Speed CD-MD Synchro
Recording.
Содержание DHC-MD595 - Mini Hi Fi Component System
Страница 76: ...Sony Corporation Printed in Japan ...