Sony DCR-VX2200E Скачать руководство пользователя

Страница: 81 / 112

Tro
ubl
es
hoo

ting

Shutter speed, gain, white balance or iris cannot be adjusted manually.

• Set the AUTO/MANUAL switch to MANUAL.

Tiny spots in white, red, blue, or green appear on the screen.

• This phenomenon appears when using a slow shutter speed (p. 28). This is not a malfunction.

The subjects passing by the frame very fast appear crooked.

• This is called the focal plane phenomenon. This is not a malfunction. Because of the way that

the image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.

The screen picture is bright, and the subject does not appear on the screen.

• Set [BACK LIGHT] to [OFF].

The screen picture is dark, and the subject does not appear on the screen.

• Press the DISPLAY/BATT INFO button to turn on the backlight (p. 16).

Horizontal stripes appear on the image.

• This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury

lamp. This is not a malfunction. This can be improved by changing the shutter speed (p. 28).

Black bands appear when you record a TV screen or computer screen.

• This can be improved by changing the shutter speed (p. 28).

Fine patterns flicker, diagonal lines look jagged.

• Adjust [SHARPNESS] to the negative side (p. 33).

If you are playing back pictures stored on a “Memory Stick Duo” media, see also the Cassette
tapes/“Memory Stick Duo” media section (p. 78).

You cannot play back tape.

• Slide the POWER switch to VCR.
• Rewind the tape (p. 42).
• You cannot play back a tape recorded in HDV format.

Playback

Continued

Содержание DCR-VX2200E

















































































































Результаты поиска

Содержание DCR-VX2200E

Отзывы:

Похожие инструкции для DCR-VX2200E

Бренды по названию

Популярные бренды

Sony DCR-VX2200E, Руководство по эксплуатации

Результаты поиска

Содержание DCR-VX2200E

Отзывы:

Похожие инструкции для DCR-VX2200E

Бренды по названию

Популярные бренды