71
Editing
Dubbing only desired scenes – Digital program editing
Step 3: Adjusting the synchronicity of the VCR
You can adjust the synchronicity of your camcorder and the VCR. Have a pen and
paper ready for notes. Before operation, eject the cassette from your camcorder.
(
1
)
Set the POWER switch to VCR on your camcorder.
(
2
)
Insert a blank tape (or a tape you want to record over) into the VCR, then set
to recording pause.
When you select i.LINK in CONTROL, you do not need to set to recording
pause.
(
3
)
Turn the SEL/PUSH EXEC dial to select ADJ TEST, then press the dial.
(
4
)
Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial.
IN and OUT are recorded on an image for 5 times each to calculate the
numerical values for adjusting the synchronicity.
The EXECUTING indicator flashes on the screen. When finished, the
indicator changes to COMPLETE.
(
5
)
Rewind the tape in the VCR, then start slow playback.
Take a note of the opening numerical value for each IN and the closing
numerical value for each OUT.
(
6
)
Calculate the average of all the opening numerical values for each IN, and the
average of all the closing numerical values for each OUT.
(
7
)
Turn the SEL/PUSH EXEC dial to select “CUT-IN”, then press the dial.
(
8
)
Turn the SEL/PUSH EXEC dial to select the average numerical value of IN,
then press the dial.
The calculated start position for recording is set.
(
9
)
Turn the SEL/PUSH EXEC dial to select “CUT-OUT”, then press the dial.
(
10
)
Turn the SEL/PUSH EXEC dial to select the average numerical value of OUT,
then press the dial.
The calculated stop position for recording is set.
(
11
)
Turn the SEL/PUSH EXEC dial to select
RETURN, then press the dial.
Содержание DCR-TRV130 - Digital8 Camcorder
Страница 111: ......
Страница 112: ...Sony Corporation Printed in Japan 3 0 6 5 6 5 1 1 1 ...
