9-
GB
Introduction
(
2
)
Press the centre
z
on the control button to enter the character.
Pressing it repeatedly selects the other characters on the key. When inputting
the same character or the other characters on the same key, select another key
using
v
/
V
/
b
/
B
on the control button, then select the previous key again. For
details on available characters, see the “The available characters list” on page
12.
(
3
)
Repeat steps 1 and 2 to input characters.
(
4
)
After you input the characters, select [Enter], then press the centre
z
on the
control button.
The screen which is displayed before you display the character input screen
appears.
Note
Even if you cancel the character input operation, select [Enter], then press the centre
z
on the control button to exit the character input screen.
To delete a character
Select [
<
] or [
,
]. Each time you press the centre
z
on the control button, the cursor is
moved to the left or right. Move the cursor to the right of the character at which you
want to delete, select [Back Space], then press the centre
z
on the control button. The
character at the left of the cursor is deleted.
To add a character
Select [
<
] or [
,
]. Each time you press the centre
z
on the control button, the cursor is
moved to the left or right. Move the cursor to the position at which you want to add a
character, then input characters.
To start a new line
Select [
], then press the centre
z
on the control button.
Basic operations in the NETWORK mode
Содержание DCR-IP7BT - Network Handycam Ip
Страница 154: ......
Страница 155: ......
Страница 156: ...Sony Corporation Printed in Japan 3 0 7 1 1 3 2 1 2 ...
