Sony DCR-IP210 страница 188 Скачать руководство пользователя

Страница: 188 / 220

188

Types of trouble and how to correct trouble

In the recording and playback modes

Symptom

Cause and/or Corrective Actions

• The battery pack is not inserted, or is dead or nearly dead.

Insert a charged battery pack (p. 17, 18).

• The AC power adaptor is not connected to a wall outlet.

Connect the AC power adaptor to a wall outlet (p. 21).

• The temperature of the environment is too low.
• The battery pack is not fully charged.

Charge the battery pack fully again (p. 18).

• The battery pack is completely dead, and cannot be

recharged.

Replace with a new battery pack (p. 17).

• You have used the battery pack in an extremely hot or

cold environment for a long time.

• The battery pack is completely dead, and cannot be

recharged.

Replace with a new battery pack (p. 17).

• The battery is exhausted.

Use a charged battery pack (p. 17, 18).

• A deviation has occurred in the remaining time.

Charge the battery pack fully again so that the indication
on the battery remaining indicator is correct (p. 18).

• A deviation has occurred in the remaining battery time.

Charge the battery pack fully again so that the indication
on the battery remaining indicator is correct (p. 18).

• The power source is disconnected.

Connect it firmly (p. 21).

• The battery is exhausted.

Use a charged battery pack (p. 17, 18).

• Moisture condensation has occurred.

Remove the cassette and leave your camcorder for at
least one hour to acclimatize (p. 201).

• The

REMAIN is set to AUTO in the menu settings.

Set it to ON to always display the remaining tape
indicator (p. 183).

The POWER switch does not turn on.

The battery pack is quickly
discharged.

The battery remaining indicator does
not indicate the correct time.

The power goes off although the
battery remaining indicator indicates
that the battery pack has enough
power to operate.

The cassette cannot be removed from
the holder.

The

and

indicators flash and no

functions except for cassette ejection
work.

Remaining tape indicator is not
displayed.

Содержание DCR-IP210





























































































































































































































Результаты поиска

Содержание DCR-IP210

Отзывы:

Похожие инструкции для DCR-IP210

Бренды по названию

Популярные бренды

Sony DCR-IP210, Руководство по эксплуатации

Результаты поиска

Содержание DCR-IP210

Отзывы:

Похожие инструкции для DCR-IP210

Бренды по названию

Популярные бренды