Sony DC-700, Руководство по эксплуатации

Страница: 29 / 60

29
3-867-447-
07(1)

WEN (Write Enable Pulse) Output connector (BNC)
Outputs a Write Enable Pulse. The Write Enable Pulse
transmits a timing to read an image into an external
device (e.g., image processing system).
Note
The function of this jack is not compatible with certain
models. For more details, see the operating instructions
for video camera.

TRIG (Trigger) Input connector (BNC)
Inputs a trigger signal. The trigger signal allows you to
control the electronic shutter function of the video camera.
Notes
• The function of this jack is not compatible with certain
models. For more details, see the operating instructions
for video camera.
• If you connect the XC-55/55BB or XC-56/56BB, you
can use the VIDEO 2 connector

as the TRIG input
connector.

VD/SYNC (Vertical synchronization/
Synchronization) Input/Output connector (BNC)
Inputs or outputs a vertical synchronization signal or
synchronization signal.
Note
The function of this jack is not compatible with certain
models. For more details, see the operating instructions
for video camera.

VIDEO output connector (BNC)
Outputs a composite video signal from the camera.
Note
The function of this jack is not compatible with certain
models. For more details, see the operating instructions
for video camera.
VIDEO 1: Outputs a video signal of the camera
connected to the unit. Outputs a VIDEO OUT1
signal when the XC-7500/8500CE is connected to
the unit. Outputs a Y signal in Y/C mode when
using the XC-555/555P, XC-777A/777AP or
XC-999/999P model.
VIDEO 2: Outputs a VIDEO OUT2 signal when the
XC-7500/8500CE is connected to the unit. Outputs
a C signal in Y/C mode when using the
XC-555/555P, XC-777A/777AP or XC-999/999P
model. You can use this connector as a TRIG input
connector if you connect the XC-55/55BB or
XC-56/56BB model.